• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

Root Recovery problem need advice

J

joe1379

Newbie
I did a factory wipe to my zte warp sequense from the recovery and now i cant get into the recovery or in to the factory mode it stay on the little green android is there any way to recover from that
 
Yeah i was, I've been checking out different mods and i wanted to go back to stock and this happened, i read that i can try burning Warp2_Recovery_Flasher_3.iso onto a disc and booting my PC with i can fix it, the problem is the debug on my phone is turned off so I'm kinda stuck. Is their something else i can try.
 
if you see the android it is at least possible you are in fastboot mode. Are you sure you are pressing vol down + power instead of vol up + power? vol up + power gets you to bootloader/fastboot mode.

This should be in the all things root section
 
Yeah I'm doing vol. Down + pwr. And it starts and the green android starts to fade away and then nothing just a gray screen with the red LED still on
 
joe1379 said:
Yeah I'm doing vol. Down + pwr. And it starts and the green android starts to fade away and then nothing just a gray screen with the red LED still on
Click to expand...

Do you have adb access? plug it into your computer, open up a terminal (cmd.exe in windows), and type:
Code: 
adb devices
If not, try doing volume up and power and see if you enter fastboot/bootloader mode. If so we can probably fix it.
 
vol up and power is ftm qualcomm dfu mode... both volumes at the same time and power is factory dfu mode.... vol down and power is recovery. there is unfortunately not a fastboot/bootloader mode button combo on the N861. This sounds like a pretty bricked phone... best bet would be to try the n861 online updating tool.... try and put into the gray screen again by pressing vol up and power then running the software. Hope it all works out for you... :)

Note: the online updating software instructions for putting the phone in the right mode are erroneous. it is in fact vol up and power and not vol down and power...
 
@smartmanvartan Yep, you are right. I was thinking about dfu because I was just reading about it's possibilities...but I even got that wrong lol long day
 
use the partition ics zip flash on cwm first then flas stock recover put the phone on fta mode connect phone to zte tool let the Zte tool do the update when finish do ota for bo9 and after finish doing ota for b09 then do ota for b11 u should be good if fallow intructions
 
boricuakiller said:
use the partition ics zip flash on cwm first then flas stock recover put the phone on fta mode connect phone to zte tool let the Zte tool do the update when finish do ota for bo9 and after finish doing ota for b09 then do ota for b11 u should be good if fallow intructions
Click to expand...

He has the public mobile version of our phone. So the process is a bit different i thinkor hed of gotten it already
 
boricuakiller said:
use the partition ics zip flash on cwm first then flas stock recover put the phone on fta mode connect phone to zte tool let the Zte tool do the update when finish do ota for bo9 and after finish doing ota for b09 then do ota for b11 u should be good if fallow intructions
Click to expand...
He can't get into cwm, or the rom...part of the original post.
TehJibba said:
He has the public mobile version of our phone. So the process is a bit different i thinkor hed of gotten it already
Click to expand...
He did not say he was on public mobile.
 
@boricuakiller
It is a misconception that fta does not work when you have cwm... when pressing vol up and power when you have cwm...the recovery will come up but the pc connection mode is still dfu. But regardless he has no access to recovery or system...his only option is the online using tool....

For myself, I have a different radio partition where the cellular bands are configured differently.. so unfortunately B11 works on my phone but it's either i deal with the flickering screen issue and use my stock partitions or use the jb system prep and lose all cellular connection... for now anyways...
 
smartmanvartan said:
@boricuakiller
It is a misconception that fta does not work when you have cwm... when pressing vol up and power when you have cwm...the recovery will come up but the pc connection mode is still dfu. But regardless he has no access to recovery or system...his only option is the online using tool....
Click to expand...

Unfortunately, I don't think the online upgrade tool will work because he probably already has the b11 partitions and it will think he is already upgraded.
 
You must log in or register to reply here.
Back
Top Bottom