• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

Root brick hard

no sir, have a dev from xda re-working the dll for me. holidays are over. no idea when itll be done. this brick seems to keep getting heavier
 
For those that are having problems with the PC recognizing the volt while bricked, I might have a fix for you.

Install latest USB drivers to computer
Go to device manager on computer
Plug the phone into computer and click on "scan for hardware changes"
----------Try to find the device. (After I flashed the zv4 rom by donjuro, the phone still showed up as "lgls740_z3" in Device Manager. Check for that under USB, COM PORTS, OR at the very top of the list)
Right click on device and go to properties.
----------it should say that the drivers were not installed.
Click the Driver tab and choose "Update Driver"
Click "Browse my computer for computer software"
Click "Let me pick from a list of device drivers on my computer"
Untick the box that says "Show compatible hardware"'
In the left column, click on ADB Google Fastboot Interface and install that driver.
When in fastboot or adb, look for Adb>Fastboot Interface (Google USB ID) at the very top of the list in Device Manager

You should now be able to boot into fastboot/ADB​
 
Last edited:
Over the holidays my macbook was destroyed and lost all my work and moved Dept's. @ work.. Really bummed and haven't been able to do anything to get this fixed..

dstacy90 said:
  • For those that are having problems with the PC recognizing the volt while bricked, I might have a fix for you.

    Install latest USB drivers to computer
    Turn phone off
    Go to device manager on computer
    plug into computer and click on "scan for hardware changes"
    ----Try to find the device(Either under USB, COM PORTS, OR at the very top of the list under android. )
    Right click on device and go to properties.
    ----it should say that the drivers were not installed.
    Click update drivers
    Click "search manually", then search for the drivers already installed on the computer.
    It then tells you to pick your manufacturer and device model. In the left column click on ADB Google Fastboot Interface and install that driver.

    You can now restore with ADB and fastboot. I can go into further detail when I get home if anyone needs me to
Click to expand...

I'm going to try this ASAP. Thanks
 
baconsauce said:
Over the holidays my macbook was destroyed and lost all my work and moved Dept's. @ work.. Really bummed and haven't been able to do anything to get this fixed..

I'm going to try this ASAP. Thanks
Click to expand...
i've edited that post to give a better explanation. good luck with everything
 
Last edited:
IS YOUR phone working now？ i got a key may working
1. Use the LG FALSH TOOL 2014 to flash the kdz for the vs876 with the CSE flash mode
2.OK，root ---install rec---flash zv4 or zv5 or CM11
3. Got it
May cause no signal ，now flash the 28 29 30 31 32 partitions using adb tool （dd if=。。。）
 
palmprefans said:
IS YOUR phone working now？ i got a key may working
1. Use the LG FALSH TOOL 2014 to flash the kdz for the vs876 with the CSE flash mode
2.OK，root ---install rec---flash zv4 or zv5 or CM11
3. Got it
May cause no signal ，now flash the 28 29 30 31 32 partitions using adb tool （dd if=。。。）
Click to expand...

that is a very vague explaination.. can you get a little more detail? especially with the last part, did you use bin extractor on the .tot for those partitions?
 
I was wondering if anyone could help me my I had cm12 on my LG volt and was going to flash a miui rom and didn't notice it was for a different phone and now my phone is not doing anything it just has a black screen but when I connect it to my computer it says the phones connected but when I clock on it to see the files only a image file and a different one are in there

Any ideas how to help?
 
You must log in or register to reply here.
Back
Top Bottom