• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

BOOST SGS2 FH29 Root Achieved!

Yes someone needs to separate the installing cwm and flashing superuser as it's own root guide.with links.

And make a separate thread for cm10 Rom..

That's how we organize forums for long-term... I posted about this earlier in the thread but it wasn't addressed. We need to start with a root guide, then make separate threads for [roms]

I will do it if the op doesn't handle it in a few days. I'm always working but I will find time if need be;)
 
SelfElevated2 said:
Yes someone needs to separate the installing cwm and flashing superuser as it's own root guide.with links.

And make a separate thread for cm10 Rom..

That's how we organize forums for long-term... I posted about this earlier in the thread but it wasn't addressed. We need to start with a root guide, then make separate threads for [roms]

I will do it if the op doesn't handle it in a few days. I'm always working but I will find time if need be;)
Click to expand...

Done and done. I tried to break it down step by step.
 
Mark112887 said:
This is what I have, this is the stock rom the phone shipped with before the FH29 update

Dev-Host - D710BST_CODE_SPH-D710BST.FG31_CL981989_REV02_user_low_ship.tar.md5.7z - The Ultimate Free File Hosting / File Sharing Service

If you would rather I pull the kernel from my phone which is on FH29 can we get on a messenger of your choice so you can assist me
Click to expand...

I can confirm this (FG31) is the original from boost, I flashed it on my phone after a problem I had, then I got an OTA update to FH29.
 
I have two questions.... and a problem...

1. is it possible that there's going to be a way to root this phone (Original Boost Mobile GS2, FH29) without having to flash a kernel at all? I know there's nothing out yet, but, will be?

2. If not, after flashing the Agat kernel and rooting the phone, does anyone have the original one to flash it back again? (I'm not talking about the whole system, just the original system recovery <3e>, the one that Agat replaces)

Problem: I got my phone (Boost GS2 FH29) rooted with the AGAT and the SU zip file, everything was working ok, SU, etc. etc., then I went to recovery (Agat) and did a back up to my SD card... after that my phone didn't boot again and got stock in the Galaxy S boot screen, so I had to start from scratch and re-flash the whole system again..., now I'm back to stock FH29. That's why I'm so concerned about not wanting to flash a recovery tool (Agat). Any Ideas?

Thanks
 
For whoever is interested:
If you want to reset the flash counter and the yellow triangle in Boost Mobile GS2 FH29 this app worked for me perfectly, it's called: [root] Triangle Away, by Chainfire.
It's not free, I think it was like $4.

Again, IT WORKED FOR ME, if it does NOT work for you and your phone bricks it's not my problem, sorry.
 
Issue installing CM10.
I downloaded the same CM10 that you did
"cm-10-20120903-UNOFFICIAL-d710"
I have flashed the Kernel you used and everything
when I try to install the CM10 zip I get an error

assert failed: getprop("ro.product.device") == "epic4gtouch" || getprop(ro.build.product") == "epic4gtouch" || assert failed: getprop("ro.product.device") == "SPHD710" || getprop(ro.build.product") == "SPHD710" ||
E: Error in /sdcard/cm-10-20120903-UNOFFICIAL-d710.zip
(Status 7)
Installation aborted.
Click to expand...
EDIT:
I'm guessing is something to do with the build.prop but I tried to edit it and see if that would work but it did not. I changed all SPHD710 values to epic4gtouch. It did not work. Any ideas?
 
LAWLETTE said:
Issue installing CM10.
I downloaded the same CM10 that you did
"cm-10-20120903-UNOFFICIAL-d710"
I have flashed the Kernel you used and everything
when I try to install the CM10 zip I get an error

assert failed: getprop("ro.product.device") == "epic4gtouch" || getprop(ro.build.product") == "epic4gtouch" ||
Click to expand...

That error is due to the fact that the build.prop in the rom and on your phone don't match in terms of device. They have to match or it won't flash.

I know, you have the e4gt. This is an error that I was dealing with for almost 24 hours before I figured it out. Basically, you may have wiped something you weren't supposed to either intentionally or not. It's an easy fix but it took me forever to figure out. I'll edit once I get to my computer to find the link
 
guyphs said:
That error is due to the fact that the build.prop in the rom and on your phone don't match in terms of device. They have to match or it won't flash.

I know, you have the e4gt. This is an error that I was dealing with for almost 24 hours before I figured it out. Basically, you may have wiped something you weren't supposed to either intentionally or not. It's an easy fix but it took me forever to figure out. I'll edit once I get to my computer to find the link
Click to expand...

Thanks! As I stated I guessed it was something to do with the build.prop. I've flashed plenty of roms on my prevail so I was super confused when this happened. I restored my old recovery and nandroid backup so I can still use my phone for now!
 
LAWLETTE said:
Thanks! As I stated I guessed it was something to do with the build.prop. I've flashed plenty of roms on my prevail so I was super confused when this happened. I restored my old recovery and nandroid backup so I can still use my phone for now!
Click to expand...

Yeah, this was a bugger. I even wiped clean and restored back to stock via odin and it was still having the problem. But whatever, this fixed it -- flash this via odin in your pda slot. You won't be able to boot into anything other than recovery. While in recovery, flash a kernel you want that's compatible with the rom you want to flash, then flash the rom. If it works for you like it did for me, you should be able to flash no problem.
 
ITJ said:
anyone have issues using alogcat after flashing he kernel. mine isn't producing logs.. anyone?
Click to expand...

yup the kernel used in the root guide had debugging turned off so no alogcat because no log file is created when i was trying to get code for the programming menu's i had to flash a different kernel that had debugging enabled to use alogcat.

hope this helps someone
 
Would i be able to flash different kernels on the stock ROM other than the AGAT?

Would i use the AGAT kernel and recovery to flash one or would I flash the one you would flash for cm10 and then flash it in cwm?
 
ChaosCloud said:
Would i be able to flash different kernels on the stock ROM other than the AGAT?

Would i use the AGAT kernel and recovery to flash one or would I flash the one you would flash for cm10 and then flash it in cwm?
Click to expand...


Flash the AGAT .tar in Odin, then you can flash CWM .zip (using AGAT).
 
ChaosCloud said:
Would i be able to flash different kernels on the stock ROM other than the AGAT?

Would i use the AGAT kernel and recovery to flash one or would I flash the one you would flash for cm10 and then flash it in cwm?
Click to expand...
Cyberone3, what kernal did you replace agat with?
 
Im wanting to root my phone today. So i download the agat 0.5.4 , flash through odin. Then this guide says to download SU zip. Do u download that directly from ur phone and not ur computer? Or do u download it to ur computer first? Not underdtanding this part. After i figure this out, im rootin.
 
You must log in or register to reply here.
Back
Top Bottom