• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

Root CM10 RIL / Baseband discussion

sammyz said:
So what exactly do I enable, flash, w.e. on CM10 :confused:
Click to expand...

If you are trying to get to network settings on CM10:

*#*#4636#*#*

EDIT: Be careful playing around with those settings!! I don't know how this will play out while running a 2nd-init, but some peeps over in Connect CM10 thread were borking their radios while doing this.... If I were you, take a screenie, write down or take a picture of your network settings, and make sure they are returned back to where they were before rebooting into ICS again. You know, just in case those settings stick somehow, if that's possible with 2nd-init.
 
sammyz said:
So what exactly do I enable, flash, w.e. on CM10 :confused:
Click to expand...

That's what I'm confused about too,to bring up the menu in his screenshot its ##626*,type in msl then network select>network mode, that's on stock. I've tried cm10 with L-01D_RIL_VER_B_Modem.zip from one of the above posts flashed after flashing cm10,it went from no signal to 1x a lot faster than normal but no data in any network mode so I know something changed, but any thing GSM related in phone info just jumps right back to cdma/lte, I don't know of any other menu to try changing in cm10. Fwiw, its still not showing iccid in cm10, and its trying to use ruim for cdma authentication instead of the credentials stored in nvam like it was using before, so since it can't read from the sim it just keeps saying it needs to be provisioned in the radio logs because it can't read authentication info from the sim.
 
msnuser111 said:
That's what I'm confused about too,to bring up the menu in his screenshot its ##626*,type in msl then network select>network mode, that's on stock. I've tried cm10 with L-01D_RIL_VER_B_Modem.zip from one of the above posts flashed after flashing cm10,it went from no signal to 1x a lot faster than normal but no data in any network mode so I know something changed, but any thing GSM related in phone info just jumps right back to cdma/lte, I don't know of any other menu to try changing in cm10. Fwiw, its still not showing iccid in cm10, and its trying to use ruim for cdma authentication instead of the credentials stored in nvam like it was using before, so since it can't read from the sim it just keeps saying it needs to be provisioned in the radio logs because it can't read authentication info from the sim.
Click to expand...

Don't need to flash RIL.

Just, while in CM10, dial *#*#4636#*#*
change to GSM/CDMA (auto) and flash back to stock, dial ##626* enter SPC, go to network settings and you'll see it in global, don't change the setting.

@Spec, yes it was my first time running CM10 on this phone. I NEED texting, I don't care much about 4G working or not.
 
You must log in or register to reply here.
Back
Top Bottom