If you can figure out a way to access a recovery mode, you could try a factory reset, but if you ended up deleting a file that the system requires, you'll most likely stay stuck in the boot loop.
Try to see if you can get into a recovery mode (FYI, not all devices will have a recovery, especially off-brand devices.). It will probably be a combination of the hardware keys like holding the vol. dn/up and power buttons. Try different combinations. If you find it, you can try to reset it and then let us know how you make out.
Can you try Volume + and connect the USB cable?Hello.,.I use BSNL Penta w707c.which is a RK2928 based tablet.,.Yesterday i rooted and it was working well,..,suddenly i thought of install chaifire 3d,..i my device is not starting after that..i have my tab stuck on BSNL penta logo everytime i start,..i tried to update firmware given on their website,.But my tab is not going into recovery mode(i think).,.My computer is intalling my tab driver as composite ADB interface bt not as RK29 device..Thast why it is not detected by RKbatchtools or any other flash tool.,.,COuld you plz help me with any solution,..,
thanks in Advance,...
sorry for the bump, I'm just happy that I restored my tablet using Jandycane and CWM for RK2928 chipset recovery image
Uh, Hi, Can you dump the parmaters file with RKFlashtool after connecting the tablet with Volume up and USB connect?Hello!
I have this tablet and exactly the same problem. Could somebody be more specific and explain how to solve this problem? I'll be very appreciate for that.
Uh, Hi, Can you dump the parmaters file with RKFlashtool after connecting the tablet with Volume up and USB connect?
rkflashtool p > param.txt