-
After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.
generic rk2928 tablet was bricked
- Thread starter lincapa
- Start date
-
- Tags
- general tablet talk
I tried to delete a program I didn't need from /system/app, the device was rooted.
it is currently stuck in a boot loop
If you can figure out a way to access a recovery mode, you could try a factory reset, but if you ended up deleting a file that the system requires, you'll most likely stay stuck in the boot loop.
Try to see if you can get into a recovery mode (FYI, not all devices will have a recovery, especially off-brand devices.). It will probably be a combination of the hardware keys like holding the vol. dn/up and power buttons. Try different combinations. If you find it, you can try to reset it and then let us know how you make out.
Try to see if you can get into a recovery mode (FYI, not all devices will have a recovery, especially off-brand devices.). It will probably be a combination of the hardware keys like holding the vol. dn/up and power buttons. Try different combinations. If you find it, you can try to reset it and then let us know how you make out.
It looks like you have a Teac Accord 714 tablet. Most of the information I can find on that shows me it was a model available in Israel, but that's about it. I saw a few other questions looking for firmware and recovery with no answers so I would venture to say there's not much out there for this device. You could try contacting Teac directly and see if they have a tool to reflash this that they could provide to you.
contacted them, I tried to contact the people who import that, guess what?
Their inbox is always full
That's what I was afraid of. Many of the off-brand devices have little or no support after the sale.
We have a post in the Android Lounge that you might find interesting. http://androidforums.com/android-lounge/631594-off-brand-phones-tablets-worth-low-cost.html
We have a post in the Android Lounge that you might find interesting. http://androidforums.com/android-lounge/631594-off-brand-phones-tablets-worth-low-cost.html
sorry for the bump, I'm just happy that I restored my tablet using Jandycane and CWM for RK2928 chipset recovery image
no problems because it restored a file/library (and rewrote the system) that i deleted and bricked the device
Jitugupta397
Lurker
Hello.,.I use BSNL Penta w707c.which is a RK2928 based tablet.,.Yesterday i rooted and it was working well,..,suddenly i thought of install chaifire 3d,..i my device is not starting after that..i have my tab stuck on BSNL penta logo everytime i start,..i tried to update firmware given on their website,.But my tab is not going into recovery mode(i think).,.My computer is intalling my tab driver as composite ADB interface bt not as RK29 device..Thast why it is not detected by RKbatchtools or any other flash tool.,.,COuld you plz help me with any solution,..,
thanks in Advance,...
Can you try Volume + and connect the USB cable?
Hello!
I have this tablet and exactly the same problem. Could somebody be more specific and explain how to solve this problem? I'll be very appreciate for that.
Uh, Hi, Can you dump the parmaters file with RKFlashtool after connecting the tablet with Volume up and USB connect?
rkflashtool p > param.txt
I don't have any VOLUME button on my device and when I run rkflashtool from console I receive message "fatal: cannot open device"
I have TEAC logo all the time on the screen and it does not continue to boot.
Sorry for mistake!
I have Teac Classic TC-103 and it doesn't have any Volume button. It has hidden RESET hole, I pushed it few times but it doesnt help. How can I enter to recovery mode? It has only POWER button, HOME button and other HDMI, USB, miniUSB sockets and also microSD slot.
I have Teac Classic TC-103 and it doesn't have any Volume button. It has hidden RESET hole, I pushed it few times but it doesnt help. How can I enter to recovery mode? It has only POWER button, HOME button and other HDMI, USB, miniUSB sockets and also microSD slot.