I was able to install recovery.
Next thing is I would like to install the MeanBean ROM.
From the guide:
The latest full firmware (radio, etc.) is recommended. Check the firmware by pressing Menu while on your home screen, choose "Settings", "About" (bottom of list), "Software Information", "More". If your baseband is less than 1.12.11.1210, you have old firmware and should update else you could have problems with your data connection, reboots, etc. If you're s-off, you can flash the 3.16 firmware via one of the options here. Note that both the full 3.16 firmware and the new touch panel firmware are recommended for best performance, but be aware that the new touch panel firmware will only work with 3.16 based ROMs! If you tend to switch between 3.15 and 3.16 ROMs or you like to try AOSP ROMs, stick with the old touch panel firmware and don't flash the touch panel update.
It looks like I need to upgrade to RUU 3.16. It talks about the new touch panel.
I went to the link:
[FIRMWARE][S-OFF] Jewel Firmware Collection - Latest: 3.16.651.3 OTA - theMikMik
Under the download link, it says: tp.img not included in the zip. and it also says that latest tp.img breaks touch screen in recovery and on non-stock ROM.
My Question: Should I install the new tp.img or not? Should I install 3.15 or 3.16 (only compatable with 3.16 ROMs). It is confusing.
"Full" Firmware zip | Mirror 1 | Mirror 2
Includes Radio 1.12.11.1210, PRI 2.97_003 & a few other smaller updates.
HBOOT.img, recovery.img (stock), boot.img & tp.img NOT included in this zip!
(latest tp.img breaks touch screen in recovery and on non-stock ROMs)
Thanks!
Next thing is I would like to install the MeanBean ROM.
From the guide:
The latest full firmware (radio, etc.) is recommended. Check the firmware by pressing Menu while on your home screen, choose "Settings", "About" (bottom of list), "Software Information", "More". If your baseband is less than 1.12.11.1210, you have old firmware and should update else you could have problems with your data connection, reboots, etc. If you're s-off, you can flash the 3.16 firmware via one of the options here. Note that both the full 3.16 firmware and the new touch panel firmware are recommended for best performance, but be aware that the new touch panel firmware will only work with 3.16 based ROMs! If you tend to switch between 3.15 and 3.16 ROMs or you like to try AOSP ROMs, stick with the old touch panel firmware and don't flash the touch panel update.
It looks like I need to upgrade to RUU 3.16. It talks about the new touch panel.
I went to the link:
[FIRMWARE][S-OFF] Jewel Firmware Collection - Latest: 3.16.651.3 OTA - theMikMik
Under the download link, it says: tp.img not included in the zip. and it also says that latest tp.img breaks touch screen in recovery and on non-stock ROM.
My Question: Should I install the new tp.img or not? Should I install 3.15 or 3.16 (only compatable with 3.16 ROMs). It is confusing.
"Full" Firmware zip | Mirror 1 | Mirror 2
Includes Radio 1.12.11.1210, PRI 2.97_003 & a few other smaller updates.
HBOOT.img, recovery.img (stock), boot.img & tp.img NOT included in this zip!
(latest tp.img breaks touch screen in recovery and on non-stock ROMs)
Thanks!


