First Of All My Apologies For Probably Posting This In The Wrong Area.Ok So I'm COMPLETELY NEW to this site so sorry if ive posted this in the wrong area. I Have An Evo 4G 2.3.3 and I rooted my evo yesterday, installed a rom, amon ra, and tried to partition sd. When it came time for me to drag all files including rom to sd card my computer didnt recognize the device. and to make matters worse i forgot to make a nandroid using amon ra, so all i get is the white screen and ive also tried going back into amon and doing mass storage, didnt work either. so now im stuck with an evo that wont let me reflash anything and idk what to do PLEASE HELP
-
After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.
Root help
- Thread starter pete9517
- Start date
-
- Tags
- htc evo 4g
so you can get to recovery that helps. so you partitioned your card? what settings did you do? do you have a card reader? what rom are you on? how long are you waiting on the white screen?
Yes I Can Get To Recovery. And I Partitioned it Like This:
1. BACK UP YOUR MEMORY CARD TO YOUR COMPUTER AS THIS WILL ERASE EVERYTHING!!==== THIS IS IMPORTANT
2. Reboot into recovery (Use Amon RA 2.3==NOTHING OTHER THEN AMON )
3. Select =Partition sdcard=
4. Select =Partition SD=
5. Set swap to 0 (you can leave this at 32mb, I did.)
6. Ext2-size = 2048 (2GB - the 3.0 packages eat up a lot of the internal memory, you can adjust this lower, but 2GB is recommended if you have a lot of apps I did 2 and a half)
7. Select upgrade ext2 to ext3 ===DO NOT UPGRADE EXT 3 TO EXT 4=====
8.. Now go back and mount your SD card
9.. Place all your files back on the card. Also add the ROM, PRI 1.77 downgrade is recommended you will have WAKE ISSUES IF YOU DON'T.
10. If you have to flash the PRI, do so now and reboot. If not, move on.
12. Wipe everything you normally would prior to flashing a new rom.
13. Flash Kingdom
14. First boot takes about 3 to 5 mintues to get started.
15. ENJOY THE ROM FOLKS
I Dont Know How To Tell What Rom Im On But The Last One I Tried To Flash Was [ROM]-[RLS2.5-8/05/11]-KInGdOm ReWiND 3D-[2.3.3]-[Sense 3.0]. At the current moment i dont have a card reader but i can still use amon ra to use it as mass storage. i tried moving a rom onto my card from there and installing it but is would stop and say Installation Aborted. And im guessing the white evo screen will stay up as long as the phone is on. i feel like ive got to be the first one to mess this up
1. BACK UP YOUR MEMORY CARD TO YOUR COMPUTER AS THIS WILL ERASE EVERYTHING!!==== THIS IS IMPORTANT
2. Reboot into recovery (Use Amon RA 2.3==NOTHING OTHER THEN AMON )
3. Select =Partition sdcard=
4. Select =Partition SD=
5. Set swap to 0 (you can leave this at 32mb, I did.)
6. Ext2-size = 2048 (2GB - the 3.0 packages eat up a lot of the internal memory, you can adjust this lower, but 2GB is recommended if you have a lot of apps I did 2 and a half)
7. Select upgrade ext2 to ext3 ===DO NOT UPGRADE EXT 3 TO EXT 4=====
8.. Now go back and mount your SD card
9.. Place all your files back on the card. Also add the ROM, PRI 1.77 downgrade is recommended you will have WAKE ISSUES IF YOU DON'T.
10. If you have to flash the PRI, do so now and reboot. If not, move on.
12. Wipe everything you normally would prior to flashing a new rom.
13. Flash Kingdom
14. First boot takes about 3 to 5 mintues to get started.
15. ENJOY THE ROM FOLKS
I Dont Know How To Tell What Rom Im On But The Last One I Tried To Flash Was [ROM]-[RLS2.5-8/05/11]-KInGdOm ReWiND 3D-[2.3.3]-[Sense 3.0]. At the current moment i dont have a card reader but i can still use amon ra to use it as mass storage. i tried moving a rom onto my card from there and installing it but is would stop and say Installation Aborted. And im guessing the white evo screen will stay up as long as the phone is on. i feel like ive got to be the first one to mess this up
ok so re download the rom and move the file to the card and try again.
so are you getting the same error? exactly what does it say?
if this is it [ROM]-[RLS2.5-8/05/11]-KInGdOm ReWiND 3D-[2.3.3]-[Sense 3.0] - xda-developers then yes that is the right rom.
edit: did you wipe dalvik cache, cache and data?
are you on the bootanimation? if so then you are good. just give it a bit as it need to be buid dalvik cache before it can run. be patient.
nice! glad that worked.