OK so I flashed this ROM. Before I did I wiped cache and dalvik cache.
Yes, I tried all 3 options. The phone has been at the same screen for 15 mins now.
This time the ADB commands worked without any issues:
So as soon as I tried the OEM lock, I got another error msg.Yes!!!
No, not up and running yet.
When I check whats inside the /tmp folder it shows me this: (this is after pushing misc_version)
c:\mini-adb_inspire>[COLOR="Red"]fastboot oem rebootRUU[/COLOR]
... OKAY [ 0.167s]
finished. total time: 0.168s
c:\mini-adb_inspire>[COLOR="red"]fastboot flash zip RUU_Ace_HTC_WWE_1.32.405.6_Radio_12.28b.60.140e_26.03.02.26_M_release_155891_signed.zip[/COLOR] [COLOR="Blue"](if you get an error check for spaces)[/COLOR]
sending 'zip' (336097 KB)... OKAY [ 55.460s]
writing 'zip'... INFOzip header checking...
INFOshift signature_size for header checking...
INFOzip info parsing...
INFOchecking model ID...
INFOchecking custom ID...
INFOstart image[hboot] unzipping for pre-update check...
INFOstart image[hboot] flushing...
INFO[RUU]WP,hboot,0
INFO[RUU]WP,hboot,100
INFOstart image[radio] unzipping for pre-update...
INFOstart image[radio] flushing...
INFO[RUU]WP,radio,0
INFO[RUU]WP,radio,6
INFO[RUU]WP,radio,14
INFO[RUU]WP,radio,19
INFO[RUU]WP,radio,27
INFO[RUU]WP,radio,36
INFO[RUU]WP,radio,44
INFO[RUU]WP,radio,100
...
... [COLOR="blue"](many lines of similar [/COLOR]
... [COLOR="blue"]removed for simplicity)[/COLOR]
...
INFO[RUU]UZ,dzdata,0
INFO[RUU]UZ,dzdata,100
INFO[RUU]WP,dzdata,0
INFO[RUU]WP,dzdata,100
INFOstart image[rcdata] unzipping & flushing...
INFO[RUU]UZ,rcdata,0
INFO[RUU]WP,rcdata,0
INFO[RUU]WP,rcdata,100
OKAY [ 78.951s]
finished. total time: 135.884s
c:\mini-adb_inspire>[COLOR="Red"]fastboot reboot-bootloader[/COLOR]
rebooting into bootloader... OKAY [ 0.155s] [COLOR="Blue"]will reboot to fastboot. verify 0.85.0007[/COLOR]
finished. total time: 0.155s
c:\mini-adb_inspire>[COLOR="red"]fastboot reboot[/COLOR]
rebooting...
finished. total time: 0.155s
c:\miniadb_inspire>So I got an error right at the very end!!when i said "continue on" i meant just run the commands to run the ruu. litterally,just go on to the next steps after fastboot oem lock
that command relocks your bootloader(wich is why it reads relocked after you run it) so that you can run the ruu. the "failed,too many links" error is par for the course,not really an error,so i just meant to ignore it.
once again,sorry for that confustion.
at this point,youve done all the steps and got the desired result:
c:\mini-adb_inspire>fastboot getvar mainver
mainver: 1.31.405.3
finished. total time: 0.016s
so heres what to do:
*stop beating yourself up with the adb steps and errors
put your phone in fastboot. from the ace recovery you can simply:
adb reboot bootloader
do this one more time just to verify the outcome:
fastboot getvar mainver
assuming you still get 1.31.405.3,then:
fastboot oem lock
expect the failed error,and the reboot,and the stuck on quietly brilliant.
pull the battery
power on to hboot,select fsatboot
fastboot erase cache
fastboot oem rebootRUU
fastboot flash zip RUU_Ace_HTC_WWE_1.32.405.6_Radio_12.28b.60.140e_26.03.02.26_M_release_155891_signed.zip (if you get a cant open error,check for a space between 26 and .03. or any other spaces. there should not be any)
hopefully it will send,write,check,etc. then stuff will start flshing on the screen. if not,tell us the error
when it says 'finished'
fastboot reboot-bootloader
tell us the hboot info now
fastboot reboot
*cross fingers
)OK i will try to re-make the gold card now.crap! ok that means that your gold card is not made correctly,or it is not in the phone
assuming it is in the phone,we have a couple options:
1)you can try and remake it so we can run the ruu were trying to run(for wich i have additional motives
2)we can simply try running a telus branded ruu that will pass the cid check.
the important thing is that we have successfully lowered the main version,so findning an ruu for you now is going to be fairly easy
So I have just re-made the gold card. using the goldcard.img that was emailed to me.
So tried the original RUU and it didn't work again. I am currently downloading the last one you just sent:i have to step out for a bit,but if it comes down to it,i think this is the ruu you should try: Shipped ROMs
it is not the newest telus ruu,but we dont want to jump right to the newest,as that will change the main version back to a higher number,and not leave any ruus to run. if we start with the oldest,and the phone boots,we can then OTA or run an ruu for the newer software. if it continues to not boot,we can always keep runing newer ruus until either it works,or we run out of ruus to flash
IT WORKED!!!!!!!! I Followed all the steps again using: