• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

Root [Kernel]{Genocide_187} 2.6.35.14 OC+I/O+Gov_beta_1

moddedout said:
ok this is what i got. the prececedent running on AreaRom 3.0 with these kernel bookin it at 988mhz. i was using cpu master but only to set it to performance while benching other than that its default. ive had a few other with this issue also. i actually retried this kernel again a few days ago and it made it almost all day then froze on me.
Click to expand...


Try different settings until you find a good setup. I own a Prevail, I do not own a Precedent, but my brother does, so I have been testing this on his phone and have not run into any of these issues on his, this is why the op says its still in test stages. I will however look into it.

Edit: try to be a bit more desriptive. When it froze, what was the I/O set at, minimun freq, what you were doing, was your phone hot? I need to know these things to help isolate the problem.
I also cant be anticipate how this will work with different Roms and hardware. These phones are made in batches, as is all the hardware, and every batch run about the same within a certain tolerance. But we have noticed with the Prevails that sometimes those small differences are enough to cause problems with certain phones and not others.
 
To be honest it may just be my phone cause a couple of guys on AA51 are running it without issues. I'm also running a beta aosp 2.3.7 rom if idk if that may affect it.
 
Just gonna go ahead and confirm some earlier posts...

I am running AreaROM2.3 on my Precedent, I just flashed this kernel and it worked. The first boot was really, really slow. It caused me to think it was boot-looping. I pulled my battery, rebooted, and everything went smooth. AnTuTu's CPU Master confirms that my max setting is 944mhz, I pushed it down it 925mhz due to an earlier post from an AreaROM2.3 user claiming that 925 was the best setting for AreaROM. So far so good, but this is only the first hour. I've flashed several ROMs before, never tried a different kernel. I tryed using Titanium BackUp to restore apps, i'm an idiot. I did a ClockworkMod Restore after giving up on Titanium (takes too long) and everything works great. Got my apps and settings back, but kept the overclocked kernel. I should've just done that first. We'll see how it performs over the next days/weeks..

Thanks,
-Cj
 
The first week was good. Im runnin Arearom 3.0 Beta. But then i started getting random reboots and my app drawer would freeze. This was at 900 max and 98 minimum... So i reflashed AR 3.0 and am trying the tried and true area kernel. I may try this kernel one more time at some point...
 
Ok so I've been using this for a little bit now, started at 925mhz like my previous post states, worked good for awhile but rebooted twice, so i pushed it down to 900ish, worked good for awhile but froze when I loaded a game ("Cut the rope"). I pushed it down again to 888, and once again it froze while it was in my pocket. This has all been happening over a couple days, it ran for hours in between freezes/reboots. I pushed it down to 844 today, we'll see how it goes from here. if i push it down anymore there will be no reason for me to use this kernel. Anyone have any ideas as to what i may, or may not, be doing wrong? I set my minimum to 120mhz, my governor is ONDEMAND. I tryed ONDEMANDX setting one of those times it froze. I've been watching the temperature and it hasn't really got hot. I think 84F is the highest temperature I've seen.
 
CjWelborn said:
Ok so I've been using this for a little bit now, started at 925mhz like my previous post states, worked good for awhile but rebooted twice, so i pushed it down to 900ish, worked good for awhile but froze when I loaded a game ("Cut the rope"). I pushed it down again to 888, and once again it froze while it was in my pocket. This has all been happening over a couple days, it ran for hours in between freezes/reboots. I pushed it down to 844 today, we'll see how it goes from here. if i push it down anymore there will be no reason for me to use this kernel. Anyone have any ideas as to what i may, or may not, be doing wrong? I set my minimum to 120mhz, my governor is ONDEMAND. I tryed ONDEMANDX setting one of those times it froze. I've been watching the temperature and it hasn't really got hot. I think 84F is the highest temperature I've seen.
Click to expand...
These phones are made in batches, as is all the hardware, and every batch run about the same within a certain tolerance. But we have noticed with the Prevails that sometimes those small differences are enough to cause problems with certain phones and not others.
 
Awesome job The~Skater~187,I couldn't get Genocide 187_2.6.35.07 to work on my phone.
So I try you newer version and it works fine,In fact after installation my clocks were at 988MHz.But I lowered them down to 900MHz. Thanks a lot The~Skater~187 again.
 
You must log in or register to reply here.
Back
Top Bottom