jimsmith80
Android Expert
Just Over Clocked Kernel - OC to 1.4 Ghz & 1.5 Ghz
Nothing to special here. This is a rebuild of the stock kernel overclocked to 1.4 Ghz. I know everyone has been wanting to push the warplte a little bit harder, so here you go.
Installation Instructions:
Prerequisites: You must have a custom recovery (e.g. CWM or TWRP) installed to be able to load this kernel.
1. Download the most recent version from the download center above to your SD card.
2. Reboot into recovery.
3. Make a complete backup of your device!!
4. Use the install from zip (CWM) or Install (TWRP) option to navigate to where you saved the JOCK Kernel on your SD card and select it.
5. When the installer script finishes, reboot your phone.
This is a custom kernel. follow the instructions and use at your own risk. Myself and any contributing parties are not responsible if you render you phone unusable "bricked".
Change log:
V1.1 OC to 1.5 and added smartassv2 gov
This kernel is not compatible with CM11
Download:
Jock kernel 1.4 v1.0
JOCK_1.5_v1.1
Nothing to special here. This is a rebuild of the stock kernel overclocked to 1.4 Ghz. I know everyone has been wanting to push the warplte a little bit harder, so here you go.
Installation Instructions:
Prerequisites: You must have a custom recovery (e.g. CWM or TWRP) installed to be able to load this kernel.
1. Download the most recent version from the download center above to your SD card.
2. Reboot into recovery.
3. Make a complete backup of your device!!
4. Use the install from zip (CWM) or Install (TWRP) option to navigate to where you saved the JOCK Kernel on your SD card and select it.
5. When the installer script finishes, reboot your phone.
This is a custom kernel. follow the instructions and use at your own risk. Myself and any contributing parties are not responsible if you render you phone unusable "bricked".
Change log:
V1.1 OC to 1.5 and added smartassv2 gov
This kernel is not compatible with CM11
Download:
Jock kernel 1.4 v1.0
JOCK_1.5_v1.1