Sisterwind
Newbie
I can't wait to rub this in his face......
Thanks a million
Thanks a million
-
After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.
Liquidsense 2.1 help!!!! Flash problems
- Thread starter rustycage24
- Start date
-
- Tags
- htc hero
Sisterwind
Newbie
Ok seem to have a problem with connecting to wifi (no icon at top of screen) 
when i go to menu and then wireless and networks
wi-fi is checked and shows that i'm connected to network
but I have no wifi icon and at market downloads took a long time
any suggestions
when i go to menu and then wireless and networks
wi-fi is checked and shows that i'm connected to network
but I have no wifi icon and at market downloads took a long time
any suggestions
Sisterwind
Newbie
Ok blond mistake got it
Battery seems to run a little hot anything that can be done for that ???
got it Battery seems to run a little hot anything that can be done for that ???
andygu3
Android Expert
Ok blond mistake
Battery seems to run a little hot anything that can be done for that ???
It will be hot for a bit, but then it should cool down.
If you decide to tether, beware phone will get extremely hot so.... be aware of the temperature
rustycage24
Newbie
here goes nothing!Do a nandroid first before flashing, just in case
UPDATE: Didn't work. I'm getting ready to punt on this and just live with a slow phone!!!!
andygu3
Android Expert
What didn't work?
rustycage24
Newbie
Flashing Liquidsense after downloading straight to my phone. Do you think my problems have anything to do with this:
This is my phone software info:
Firmware - 2.1-update1
Baseband - 2.42.02.10.29
Kernel - 2.6.29-ba77cf03
Build# - 2.32.651.2 CL282911 release-keys
Software# - 2.32.651.2
If so what should I do? I'm pulling my hair out.
andygu3
Android Expert
If you have successfully rooted your phone and you have flashed a recovery, it won't matter what build you have
rustycage24
Newbie
What do you think I should do now? What is the best way to just completely start over? There is something messed up somewhere on my phone I guess. When do I need to be in debug mode and when shouldn't I be? Does 64bit Win7 have anything to do with this?
andygu3
Android Expert
To be honest, I never connect my phone via usb. If I need to see what's on my sd card, I use es file explorer. I download all roms directly to the phone and flash from recovery that way. The only time I connect via usb is when I need to transfer something to the computer for safe keeping, ie; nandroid, pictures...
OK I went back to all your post and noticed you are using the CWM app to boot into recovery, have you tried booting into recovery with your phone off, hold the volume key down and end key at the same time, then when prompted hit the home key to get into recovery, then wipe cache and davlik, nothing else, then try to flash LS again and reboot, report back
rustycage24
Newbie
I've got SU in my app drawer. I've successfully flashed CM6, but that's it. I've tried to flash AOSP (aospMod-v0.9.9.2-signed.zip and gapps-mdpi-20101213-signed.zip) except that when it reboots it just stays on the HTC startup screen. I have to pull the battery out for that one.
Try what I said and report back, if not then you will most likely have to install the RUU again and root your phone again, because if you flashed CM6 before there is not reason why you can't flash AOSP or LS, one more thing to ask a stupid question but have to ask, your phone is a Sprint CDMA phone correct?
rustycage24
Newbie
I would assume that it is a CDMA phone since I bought it from Sprint. How else would I be able to tell? That's all CWM offers me too. Let me try it the way you suggested and get back to you. Thanks for all the help btw.
andygu3
Android Expert
If you've gotten CM6 to boot...
Download
aospMod-v0.9.9.2-signed.zip
gapps-mdpi-20101213-signed.zip
http://dl.dropbox.com/u/9992367/DecaFuct-12222010-691.zip
Boot to recovery
Wipe data/factory reset
Wipe cache partition
Wipe dalvik cache
Flash 0.9.9.2
Flash gapps
Flash kernel
(Flash all one by one)
Reboot phone
Then it is CDMA, had to ask as we have help many to find out they were not, LOL just making sure
The reason why I mention to some to try it that way, I never use the app to flash, because sometimes the CWM app causes issue and also some have issues when they do a FR and wipe partition, so figure it is worth a shot
rustycage24
Newbie
how long should it take for it to boot up? It's been stuck on the "Now" screen for a bit. I installed it from the download folder on my sd card too, not the root.
BTW, where can I get the RUU?
andygu3
Android Expert
You don't need to reroot but if you do look here Hero CDMA - XDA-Developers
Boot up can take 5-10 minutes
rustycage24
Newbie
No luck on this one. I've been sitting on the HTC screen for over 5 mins. I'll wait about 5 more and then I'm punting.
I'll probably just flash the RUU and start completely over.
rustycage24
Newbie
No luck again. Just out of curiosity, what should I see mounted/unmounted in the partitions menu in recovery mode?
I'm probably gonna flash a RUU and start completely over. Any suggestions on with one?
andygu3
Android Expert
Before you give up and run the ruu do this, since you have the rom, gapps and kernel downloaded
Boot to recovery
Go to the partitions menu
DO NOT FORMAT SD CARD
Format boot....yes
Format system......yes
Format cache.....yes
Format data......yes
DO NOT FORMAT SD CARD
Go back to main screen in recovery
Wipe data/factory reset
Wipe cache partition
Go to advanced, wipe dalvik cache and then press back
Go to install zip from sd card
Flash 0.9.9.2..........installation complete
Flash gapps.............installation complete
Flash kernel..........installation complete
Reboot phone
rustycage24
Newbie
Sigh. No luck. Still just sits on HTC screen.