dieselmachine
Lurker
I was listening to music on my phone (EVO 4G w/ Cyanogenmod 7) and it just shut down. I tried to turn it back on and the 'HTC EVO 4G' white screen came up, disappeared, then came up again. It will keep doing this. I can get into the bootloader, but attempting to select 'recovery' instantly loads the white screen again and sends it back into the loop. I have tried updating the recovery to AR 2.3 using HBOOT, and it claims the installation was successful, but rebooting and attempting to select recovery results in the same thing.
My device does NOT show up when running 'adb devices'
My device DOES show up when running 'fastboot devices'
I CANNOT flash anything via fastboot. I get an error message which looks like this:
sudo ./fastboot-linux-i386 flash boot boot.img
sending 'boot' (1976 KB)... OKAY
writing 'boot'... FAILED (remote: not allowed)
I CANNOT get into Android at all, which means I CANNOT enable USB debugging. As ADB seems to rely on USB debugging to be enabled in order to 'register' the device, this means anything involving ADB is out of the question (correct me if this last point is wrong, I've not seen it posted anywhere (and I've been searching for hours), and is based solely off my own tests involving another phone which failed to register until USB debugging was enabled)
The info at the top of the bootloader screen reads:
SUPERSONIC EVT2-3 SHIP S-OFF
HBOOT-0.97.0000
MICROP-041f
TOUCH PANEL-ATMELC03_16ac
RADIO-2.15.00.11.19
I haven't added or edited anything on this phone in months. I've been running cyanogen (the same version, never updated) for months now, which no issues at all. This error came out of nowhere, and because it was through no action of my own, I have absolutely no idea what could be causing it.
What specifically is preventing me from flashing via fastboot? Is it that my version of HBOOT does not allow it? What is generating the "remote: not allowed" error when I try to flash? It states at hxxp://wiki.cyanogenmod.com/wiki/Fastboot "You must have an Engineering SPL, or an SPL that is S-OFF.". I don't know what an SPL is, but my HBOOT indicates S-OFF. Is this what it's referring to? Is it possible that, because my phone is S-OFF, and supports SOME functions of fastboot, that the preceding statement is true, and doesn't actually indicate the ability to flash, only to run basic commands?
Today was abnormally warm in Seattle, and I left the house wearing a leather jacket, not expecting it to be nice out. My phone was in a pocket of a leather jacket in 70 degree weather, could I have overheated it and caused permanent damage? Does this failure sound like it could stem from that?
What would be the best plan of attack here? Sorry for so many questions, but I'm trying to learn as much as I can about a bunch of new things, I don't want to miss any important details.
My device does NOT show up when running 'adb devices'
My device DOES show up when running 'fastboot devices'
I CANNOT flash anything via fastboot. I get an error message which looks like this:
sudo ./fastboot-linux-i386 flash boot boot.img
sending 'boot' (1976 KB)... OKAY
writing 'boot'... FAILED (remote: not allowed)
I CANNOT get into Android at all, which means I CANNOT enable USB debugging. As ADB seems to rely on USB debugging to be enabled in order to 'register' the device, this means anything involving ADB is out of the question (correct me if this last point is wrong, I've not seen it posted anywhere (and I've been searching for hours), and is based solely off my own tests involving another phone which failed to register until USB debugging was enabled)
The info at the top of the bootloader screen reads:
SUPERSONIC EVT2-3 SHIP S-OFF
HBOOT-0.97.0000
MICROP-041f
TOUCH PANEL-ATMELC03_16ac
RADIO-2.15.00.11.19
I haven't added or edited anything on this phone in months. I've been running cyanogen (the same version, never updated) for months now, which no issues at all. This error came out of nowhere, and because it was through no action of my own, I have absolutely no idea what could be causing it.
What specifically is preventing me from flashing via fastboot? Is it that my version of HBOOT does not allow it? What is generating the "remote: not allowed" error when I try to flash? It states at hxxp://wiki.cyanogenmod.com/wiki/Fastboot "You must have an Engineering SPL, or an SPL that is S-OFF.". I don't know what an SPL is, but my HBOOT indicates S-OFF. Is this what it's referring to? Is it possible that, because my phone is S-OFF, and supports SOME functions of fastboot, that the preceding statement is true, and doesn't actually indicate the ability to flash, only to run basic commands?
Today was abnormally warm in Seattle, and I left the house wearing a leather jacket, not expecting it to be nice out. My phone was in a pocket of a leather jacket in 70 degree weather, could I have overheated it and caused permanent damage? Does this failure sound like it could stem from that?
What would be the best plan of attack here? Sorry for so many questions, but I'm trying to learn as much as I can about a bunch of new things, I don't want to miss any important details.


