• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

Help Please help me x10 nordic firmware

M

mrsandman1951

Newbie
I have tryed the posts on how to get nordic firmware on my x10 but none of them are working - any help would be greatly appreciated - i cannot stand 1.6 any longer
 
Where do you get stuck?

Bin4ry said:
Okay guys.
Here is new X10flash for Firmware 2.1 Version (old 1.6 Firmware can not be flashed with this at the moment).

Windows 7/Vista Users should diasable UAC!!

Download Flasher: (Update 2.11.2010)
http://www-stud.uni-due.de/~sfanmakr/X10Flash/X10Flash-2.1.zip
Thanks to jerpelea and the_laser(for giving the hint what is wrong)

You will see that there is a new Folder "firmware" the firmware files must be inside this folder!

Download Firmware:
Multiupload.com - upload your files to multiple file hosting sites!
Thanks to imugur and Reb0rn

Put the extracted files into the new "firmware" Folder and run the X10flash.bat

You have to wipe your USERDATA !! This is important, otherwise you will enter Bootloops etc.
Also be sure SEUS is NOT running! (But at least it should have detected your phone once)

THIS FIRMWARE IS ONLY FOR X10 NOT FOR MINI (PRO) or X8 !
But the flashtool should be capable of flashing all Xperia Series now!
If someone decrypts the Rom you can try it :)

Regards
Bin4ry


IF YOU HAVE PROBLEMS LIKE "Unable to Open Channel" please try this guide:
 thanks aussiesausage
xda-developers - View Single Post - X10Flash 2.1 final & 2.1 Firmware (Updated Flasher 2.11.2010)
Click to expand...
 
Hi have copied everything i should have - soon as i run the flash it asks what model = hit 1 for x10 which i do then it asks wipe user interface which i do - then nothing the flash disaperrs
 
mrsandman1951 said:
I am running windows xp - does this matter
Click to expand...
It shouldn't do no. From the "if you have problems" link...

Make sure you have your 2.1 firmware inside the "firmware" folder.

1: press start and search "regedit"
2: click edit>find, and type in "Vid_0fce&Pid_adde". You should find "DeviceInstance". Copy the last section of that, it should look something like "5&2888d0ff&0&1"

2.1: If that fails to see anything, make sure "Match whole string" is un-ticked, and click "find next", if that fails, try "USB\VID_0FCE&PID_ADDE"

Note: It changes with every diffrent USB port you use

3: Put that number into DeviceID.txt

4: Open up x10flash.bat, and answer the question (s)

5: switch off your phone, hold DOWN the Back key on your phone and plug your USB cable into the top of your phone, and press enter.

If done corrently it should start going through all these commands.

As stated above, it MIGHT take awhile to boot your phone at first, its not instant. Just give it time.
Click to expand...
 
hi thanks for ya help ive gotten a little bit further. phone flashed no problem. once completed turned phone back on but all i had was a camera picture with an arrow underneath it- waited for about 10 mins nothing happened. turned phone off
 
mrsandman1951 said:
hi thanks for ya help ive gotten a little bit further. phone flashed no problem. once completed turned phone back on but all i had was a camera picture with an arrow underneath it- waited for about 10 mins nothing happened. turned phone off
Click to expand...

That's actually suppose to happen. If you had left it alone, it would have eventually booted up.
 
You must log in or register to reply here.
Back
Top Bottom