Does anyone have the EFS.tar file from FA19 rooted I can use in Odin? Or more importantly is it even possible or would I possibly fully brick the phone? I ask because I have flashed the boot.tar, phone.tar, pda.tar, and even csc.tar already with no luck , so I figure at this point it couldnt hurt to try an EFS.tar.
I am waiting to contact Samsung tomorrow since my buddy bought it back in Aug. I know it is still covered by warranty, so he may just have to go that route...
*EDIT* I figured it couldn't hurt to ask, when you flash boot, phone, and pda .tars through Odin, do you get the big partition size message like below?
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
<1> 1/9 Finished.
<1> qcsbl download..
<1> 2/9 Finished.
<1> oemsbl download..
<1> 3/9 Finished.
<1> amss download..
<1> 4/9 Finished.
<1> arm11boot download..
<1> 5/9 Finished.
<1> boot.img download..
<1> 6/9 Finished.
<1> recovery.img download..
<1> 7/9 Finished.
<1> system.rfs download..
<1> 8/9 Finished.
<1> data.rfs download..
<1> 9/9 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.