Downloaded RSD Lite v4.8 and installed it.
Downloaded SHADO_X6_2.3.34_SYSTEM-ONLY.sbf
Hold volume down/camera/power on phone and get flash on screen.
Plug phone in to USB and RSD goes through 3 steps:
1. create image file (just under 2 minutes)
2. flash (about 3 1/2 minutes)
3. reboot (I leave it plugged in to the USB until it says 100%)
RSD then gives me a message saying to manually power up this phone. The phone has never lost power and displays a M on a red background. So I do a battery pull and turn it back on and get the same M for several minutes. Then I turn it back on with the home button held down. I get the red M but never get the Andriod character. The M just cycles on and off as long as I'm holding the HOME button or comes on and stays on if I release HOME.
What have I done wrong? Please?
Downloaded SHADO_X6_2.3.34_SYSTEM-ONLY.sbf
Hold volume down/camera/power on phone and get flash on screen.
Plug phone in to USB and RSD goes through 3 steps:
1. create image file (just under 2 minutes)
2. flash (about 3 1/2 minutes)
3. reboot (I leave it plugged in to the USB until it says 100%)
RSD then gives me a message saying to manually power up this phone. The phone has never lost power and displays a M on a red background. So I do a battery pull and turn it back on and get the same M for several minutes. Then I turn it back on with the home button held down. I get the red M but never get the Andriod character. The M just cycles on and off as long as I'm holding the HOME button or comes on and stays on if I release HOME.
What have I done wrong? Please?