• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

Root Sprint/Boost ## codes for the Transform Ultra

chevanlol360

chevanlol360

Android Expert
This is a list of codes that i have narrowed down from hundreds of various list. The ones below are codes that i have tested and can confirm that they worked.

Use these codes at YOUR OWN RISK!!! By using the codes, you understand that I am not liable for any or all consequences of the codes below.


Code: 
*#7780#
This code can be used for a factory data reset. It'll remove following things:
Google account settings stored in your phone
System and application data and settings
Downloaded applications
It'll NOT remove:
Current system software and bundled applications
SD card files e.g. photos, music files, etc.
PS: Once you give this code, you get a prompt screen asking you to click on "Reset phone" button. So you get a chance to cancel your operation


Some of the codes below needs your MSL code.

Codes to launch various Factory Tests:
*#0*# - LCD test
*#0673# - Melody test[/B]
*#0842# - Device test (Vibration test)
*#2663# - Touch screen version
*#0588# - Proximity sensor test
*#3264# - RAM version
##8778# - Bootloader
##33284# - Shows the cellular radio debug info, signal etc...
##72786# - changes DSA back to Factory Close to a hand free activation.
*#0228# - Battery Status
*#2663# - Main firmware update
*#7450# - Phone Dump Mode Disable
*#7451# - Phone Dump Mode Enable
*#06# - Displays MEID
 
interesting... when using the touchscreen test in the LCD test the. touchscreen doesn't screw up like it usually does
 
KydDynoMyte said:
*#2663# listed twice. Does a different code give you touch screen version?



Screws up for me on both touch screen tests.
Click to expand...

in *#0*# screentest I can drag for about 15 seconds before it skips . with *#2663# I get an option for firmware update . debating whether I should accept
 
gkak said:
interesting... when using the touchscreen test in the LCD test the. touchscreen doesn't screw up like it usually does
Click to expand...



I confirm! With significant pressure I cannot get it to skip.. only skips with easy pressure.
Using *#0*# touch
 
I tested again and again.... this is great news.... we need to look into this!

It actually works..... yeah!!!!! :)
 
I would like to see if there is a *#2663# - Main firmware update available I am on Sprint and already have a problem with battery/USB any suggestions? Any ideas if it would just hurt more? Go for it or just forget about it and wait til I get a new phone? :confused:
 
cwgraf71 said:
I would like to see if there is a *#2663# - Main firmware update available I am on Sprint and already have a problem with battery/USB any suggestions? Any ideas if it would just hurt more? Go for it or just forget about it and wait til I get a new phone? :confused:
Click to expand...

Theres no firmware update available at this time. Wait till you get a new phone.
 
##33284# is a test and settings menu for different things becareful here its buggy do not change or use menu items unless you know what they're for . ##72786# does what your asking. it resets the network setting to factory if you run into a network error .
chev i'm having problems ( every modded rom i've used the evdo setting gets the error 7) with ##33284# others / hrd/1x / evdo .
 
if u use the *#0*# code and choose "touch" u can see the greatness that is bobZhome's new kernel. no more skips
 
I am new to all this I think someone else or a program like a treacer had control over my cell. Boost just did an update and now I do not have any signal besides wifi any help plz...
 
I was trying to fix my incoming calls and the tech had me go to the MIN settings to enter the MIN number and my phone number..... Anyone know what the # number is for that?
 
You must log in or register to reply here.
Back
Top Bottom