how awesome is that! cool,im not sure what you should do. hopefully it will fail with an error message at some point,so the battery doesnt just run down with it pulgged in.
let me know what you find when you get home. its goot to know that this same file worked for you before.
off to work myself
from the android info doccument,this is for firmware 2.10.405.2. i found another ruu for it,downloaded it,and it does have a different md5 than the other one we used. this doesnt neccessarily mean the one we used is bad,just that there is something different about it.
this is the link to is,just in case we need it later.
RUU_Bravo_Froyo_HTC_WWE_2.10.405.2_R_Radio_32.44.00.32U_5.09.05.30_2_release_142828_signed.exe
when i get home later,ill extract rom.zip from this one,and make sure its the same as whats in your download,and make sure the hboot is the same as i uploaded for you.
if this is the same file you used the first time,it should still work. if its different,might want to redownload and try again.
if you get it flashed,dont do the hboot update until ive had a chance to check the 2nd ruu
i manage to flash the phone without any problems with the ruu link you posted. So il just wait for you now =)
Thank goooodddd i did not mess my phone up
pheewwww im so luckkyyyyyy
ok,you are good to go. the ruu that you used this morning that hung in the middle must have become corrupt,somehow. it had a different md5 than the rom that i extracted from the second link,but luckily some other part was the cuplrit(prolly system,it had an error when i extracted it),as the hboot_8x50_0.93.0001_20100810.nb0 image was the same in both roms.
both hboots images had an md5 of a330d265802187ecd89a1e84a63e3c17
yesterdays download is safe,go ahead and flash it with the new guide and let me know how it goes
I tried it again after i posted but still the same im affraid =/
btw what time zone are you in?
Dont want to keep you awake if your tired
fastboot oem ?eastern standard... its only 7:00 pm here
the second time was it still 0 seconds? or take a lil time?
while youre in the command window... enter this:
Code:fastboot oem ?
you dont need to type all that out,but make sure it spits out a long list.
you forgot the ?
should beCode:fastboot oem ?
and it should tell you a big bunch of commands
C:\Users\Scott>fastboot oem ?
...
(bootloader) command list
(bootloader) keytest
(bootloader) heap
(bootloader) boot
(bootloader) reset
(bootloader) powerdown
(bootloader) rebootRUU
(bootloader) heap_test
(bootloader) rtask
(bootloader) task
(bootloader) enableqxdm
(bootloader) gencheckpt
(bootloader) mb
(bootloader) mh
(bootloader) mw
(bootloader) ew
(bootloader) eh
(bootloader) eb
(bootloader) mmu
(bootloader) ram_test
(bootloader) jump
(bootloader) test
(bootloader) sdtest
(bootloader) eraseconfig
(bootloader) writeconfig
(bootloader) readconfig
(bootloader) writesku
(bootloader) readsku
(bootloader) rflash
(bootloader) tflash
(bootloader) block_test
(bootloader) partition_test
(bootloader) rbchk
(bootloader) erasesd
(bootloader) btrouter
(bootloader) tick
(bootloader) heaptable
(bootloader) emapi
(bootloader) emapiTest
(bootloader) emapiCountryID
(bootloader) emapiWlanMac
(bootloader) emapiSetDefCal
(bootloader) emapiReadCal
(bootloader) lr
(bootloader) imgcrc
(bootloader) resetautoimage
(bootloader) resetpreferdiag
(bootloader) resetRUUflag
(bootloader) writeserialno
(bootloader) readserialno
(bootloader) battcheck
(bootloader) gotofastboot
(bootloader) gotohboot
(bootloader) writemid
(bootloader) usbtestmode
(bootloader) eraseWifiFlash
(bootloader) erase
(bootloader) readmbserialno
(bootloader) listpartition
(bootloader) erasebcid
(bootloader) writebcid
(bootloader) readbcid
(bootloader) fmrouter
(bootloader) fmtx
(bootloader) resetuP
(bootloader) bdaddress
(bootloader) wMfgTp
(bootloader) rMfgTp
(bootloader) emptypagecheck
(bootloader) saveprt2sd
(bootloader) savemem2sd
(bootloader) savefb2sd
(bootloader) emapiInit
(bootloader) emapiChannel
(bootloader) emapiBand
(bootloader) emapiRate
(bootloader) emapiRateset
(bootloader) emapiCountry
(bootloader) emapiTXpwr1
(bootloader) emapiPkteng_start
(bootloader) emapiPkteng_stop
(bootloader) emapiOut
(bootloader) emapiFqacurcy
(bootloader) emapiCrsuprs
(bootloader) emapiUp
(bootloader) emapiDown
(bootloader) emapiMpc
(bootloader) emapiCounters
(bootloader) emapiVersion
(bootloader) emapiEtheraddr
(bootloader) emapinRate
(bootloader) emapiSetIrqPin
(bootloader) bkflash2emmc
(bootloader) fl
(bootloader) usbspeed
OKAY [ 0.111s]C:\Users\Scott>fastboot oem ?
...
(bootloader) command list
(bootloader) keytest
(bootloader) heap
(bootloader) boot
(bootloader) reset
(bootloader) powerdown
(bootloader) rebootRUU
(bootloader) enableqxdm
(bootloader) rtask
(bootloader) task
OKAY [ 0.016s]
finished. total time: 0.016s
C:\Users\Scott>
got to give em creds for that.Haha sry, tired after work, tired for me = stupid
This is the results i got now:
C:\DESIRE>fastboot oem?
usage: fastboot [ <option> ] <command>
commands:
update <filename> reflash device from update.zip
flashall flash boot + recovery + system
flash <partition> [ <filename> ] write a file to a flash partition
erase <partition> erase a flash partition
getvar <variable> display a bootloader variable
boot <kernel> [ <ramdisk> ] download and boot kernel
flash:raw boot <kernel> [ <ramdisk> ] create bootimage and flash it
devices list all connected devices
reboot reboot device normally
reboot-bootloader reboot device into bootloader
options:
-w erase userdata and cache
-s <serial number> specify device serial number
-p <product> specify product name
-c <cmdline> override kernel commandline
-i <vendor id> specify a custom USB vendor id
-b <base_addr> specify a custom kernel base address
-n <page size> specify the nand page size. default:
2048
but I have played with programing languages quite a bit and I do believe that would qualify as a syntax error and likely not give the results you are expecting.
C:\Users\Scott>[COLOR="Red"]fastboot oem?[/COLOR]
usage: fastboot [ <option> ] <command>
commands:
update <filename> reflash device from update.zip
flashall flash boot + recovery + system
flash <partition> [ <filename> ] write a file to a flash partition
erase <partition> erase a flash partition
getvar <variable> display a bootloader variable
boot <kernel> [ <ramdisk> ] download and boot kernel
flash:raw boot <kernel> [ <ramdisk> ] create bootimage and flash it
devices list all connected devices
continue continue with autoboot
reboot reboot device normally
reboot-bootloader reboot device into bootloader
options:
-w erase userdata and cache
-s <serial number> specify device serial number
-p <product> specify product name
-c <cmdline> override kernel commandline
-i <vendor id> specify a custom USB vendor id
-b <base_addr> specify a custom kernel base address
-n <page size> specify the nand page size. default:
2048
C:\Users\Scott>im afraid not