• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

Root What are your SetCPU profile settings at?

xAusTiN said:
Just rooted my Eris and am wondering what would be the best way to use setCPU.
Click to expand...

I'm running Ivan's Eris Official 1.0 at 710MHz max. and 245MHz min. for my main settings. For my profiles, I've only enabled "Sleep/Standby" (set to 480 Max, 245 Min) and "Failsafe Profile" (set to 43 degrees C, 245 Max, 245 Min).

Note: Ivan's 1.0 ROM is kernel-locked to 710MHz, so I can't go any higher without flashing Zanfur's kernel patch and a newer version of setCPU. But, I'm happy with this speed since its safe and does the job for me.

Others have posted some of their settings here: http://androidforums.com/all-things-root-eris/98457-overclocking-hmm.html
 
scary alien said:
I'm running Ivan's Eris Official 1.0 at 710MHz max. and 245MHz min. for my main settings. For my profiles, I've only enabled "Sleep/Standby" (set to 480 Max, 245 Min) and "Failsafe Profile" (set to 43 degrees C, 245 Max, 245 Min).

Note: Ivan's 1.0 ROM is kernel-locked to 710MHz, so I can't go any higher without flashing Zanfur's kernel patch and a newer version of setCPU. But, I'm happy with this speed since its safe and does the job for me.

Others have posted some of their settings here: http://androidforums.com/all-things-root-eris/98457-overclocking-hmm.html
Click to expand...

Mine are similar...

Main CPU settings: 528 min / 768 max (ondemand)
Screen Off profile: 245 min / 480 max (ondemand)
Temp > 43 C profile: 245 min / 480 max (ondemand)
 
thenestor said:
Mine are similar...

Main CPU settings: 528 min / 768 max (ondemand)
Screen Off profile: 245 min / 480 max (ondemand)
Temp > 43 C profile: 245 min / 480 max (ondemand)
Click to expand...

...when I can stop playing with my new "X", I'm going to start tweaking my Eris a little more (now that I've got a fallback plan)...waiting for Ivan's 1.1, Zanfurs o/c patch, newer setCPU, a little higher o/c'ing, maybe a little JIT, and Paul P's suggested radio...(got some more researching to do :D)
 
Battery life on my device was suffering a bit until I enabled a profile for "screen off/sleep," as many are doing, and set it at 245/245.

I found no perceivable response difference coming out of sleep to the home screen at 710/710 in Aloysius Snow.
 
Frisco said:
Battery life on my device was suffering a bit until I enabled a profile for "screen off/sleep," as many are doing, and set it at 245/245.

I found no perceivable response difference coming out of sleep to the home screen at 710/710 in Aloysius Snow.
Click to expand...


I'm going to try that. Every time I increase the CPU setting to 768/245 my screen goes black and I have to reboot. Maybe a little too much for my phone.

I'll try 710/710.
 
Sorry for the noob question but should I be checking off "Set on Boot" for my profiles? I'm setting up my girlfriend's phone, and I'm used to switching kernels to change my OC settings (Incredible).
 
You leave 'set on boot' unchecked until you're sure your Eris is stable at the settings you've chosen, otherwise there is the possibility of landing yourself in a boot loop. Once stable you can select set on boot.
 
Is 43C the right temp to set the alarms at?

I've been using my Eris to browse some photos and do some we surfing and it kept setting off TEMP and FAILSAFE alarms.

Can I bump up to 45C safely?

My current settings are same as thenestor

Main CPU settings: 528 min / 768 max (ondemand)
Screen Off profile: 245 min / 480 max (ondemand)
Temp > 43 C profile: 245 min / 480 max (ondemand)
 
willdogs said:
Is 43C the right temp to set the alarms at?

I've been using my Eris to browse some photos and do some we surfing and it kept setting off TEMP and FAILSAFE alarms.

Can I bump up to 45C safely?

My current settings are same as thenestor

Main CPU settings: 528 min / 768 max (ondemand)
Screen Off profile: 245 min / 480 max (ondemand)
Temp > 43 C profile: 245 min / 480 max (ondemand)
Click to expand...

EDIT: But then again if you are just web browsing and hitting that failsafe you might want to put down your main CPU setting a bit. Mine only hit failsafe while charging or out in the sun. Not just casual use at all.

I wouldn't worry about it too much. I tried setting a 40C failsafe and even 45 I believe but it always hit it in my car while I was charging and running music or gps. IDK about all of you but my phone gets hella hot in a hot car, plugged into charger, while running something. I just turned the failsafe off completely right now b/c I have never had an issue with not having it set before.
 
Thanks

I think it's the "Gallery" app which is very CPU intensive. I only seem to set off alarms while using that app to look at pics for more than 5-10 mins.

Also I was outside and it is 90+ degrees right now.

I'm in my house with the A/C on full blast and no more alarms.

Still Learning tho!

Thnks
 
Have a question regarding the main screen vs profiles settings. When i switch the main screen to 710/480 it freezes. Then reboots. But when I select higher values in the profiles and enable them everything is fine.

Do the profile values over ride the main screen or is the main screen the actual OC value?
 
Also I'm getting around 2.603benchmark when running linpack test.
Currently rooted running aloysius v11.
 
I have been tweaking my SetCPU profiles lately. I'm running WW4.4 ROM with these settings

Main Profile 528 min / 729 max
Battery < 35% 480 min / 604 max
Temp > 43C 245 min / 528 max
Screen off 245 min / 480 max

These get me an average of 3.10 Linpak scores, but most of all, a phone that never lags. I hope my battery life doesn't suffer. I shall keep an eye on it.
 
No more lag for me either. My mflops may not be the fastest, but compared to how the ozone was stock (pre root) and there is really no comparison. All the apps load fast, the dialer/phone never lag now.

So happy I rooted. The OC thing i still have to spend more time to learn and figure it all out.
 
I had absolutely amazing battery life this weekend while I had good signal (like 60 hours) with my profiles set at:

Main: 768/480
Screen off: 480/245
Temp Failsafe at 44.3: 480/122

Hit the failsafe once while running Nav and charging in a 100*+ car, good thing was that the nav ran fine with that 480 max and the temp dropped like a rock after I took the back off. Linpack's are consistent 5+, running CELB 2.8
 
Running CELBv2.8

Main: 787/528
Temp >43.0 C: 480/245
Screen off: 528/480
Charging USB/Full: 787/528 (I use my phone when it is in its dock)
Charging AC/Full: 528/480
 
all with scaling On Demand. Using SetCPU 2.0.1, and Zanfur's kernel (but I dont want to blow my CPU so I dont peak over 710). Also using JIT, but dont think that is relevant to any of this.

Main Profile 19min / 710 max
Screen off 19min / 245 max
Battery < 11% 19min / 245 max
Temp > 43C 19min / 245 max

I'm going as low as 19 without any issues, I want the least amount of load when its off or not needing power, the on demand (if its working like a PC should throttle it up to peak on the highest load as needed, so the min shouldn't/hasn't been an issue so far.
 
Ok so I've been testing and changing my profiles. I noticed if I clocked the max of my Screen off and charging profiles under 528MHz, the screen will take about 2-5 seconds to turn on when I receive a call. It was annoying to me so I clocked the max at 604 and when I receive a call, the screen turns on right away.
 
You must log in or register to reply here.
Back
Top Bottom