• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

Root [MOD] CWM touch 6.0.1.1 Install

I'm sure that will flash, but I don't have a USB and no clue if it was a bad transfer, bad download, or just the fact that I wasn't even using a USB that caused this in the first place. I'm tired, so I'll just go to sleep, hopefully I wake up in the morning
 
ManlyParasite said:
Further use has shown that all sound and vibrations do not work.
Phone does not vibrate at any time that it should, and no sound at all is played. No ringtone, notification, music/games/media, etc.
Tomorrow I'll try flashing the normal cwm through ROM manager and see if that fixes it.
If it does, I'll hold off on the touch until I have a USB
Click to expand...

Sorry dude but this doesn't touch anything within the phones settings. So it's physically impossible for anything that your are saying to be affected by CWM. Ive used both of these with no problems. I was using 6.0 for weeks before I flashed the newest one.

9/10 it's user error. Just sayin but it is. Someone always leaves out a part of the story or they say the forgot this or that. Hell it's already happened in this thread.
 
Fuzzy13 said:
Sorry dude but this doesn't touch anything within the phones settings. So it's physically impossible for anything that your are saying to be affected by CWM. Ive used both of these with no problems. I was using 6.0 for weeks before I flashed the newest one.

9/10 it's user error. Just sayin but it is. Someone always leaves out a part of the story or they say the forgot this or that. Hell it's already happened in this thread.
Click to expand...
Ditto.
 
Fuzzy13 said:
Sorry dude but this doesn't touch anything within the phones settings. So it's physically impossible for anything that your are saying to be affected by CWM. Ive used both of these with no problems. I was using 6.0 for weeks before I flashed the newest one.

9/10 it's user error. Just sayin but it is. Someone always leaves out a part of the story or they say the forgot this or that. Hell it's already happened in this thread.
Click to expand...


I agree, it usually is user error, and it probably is here, I just don't know how any if this could have caused it. Going to try the grey 1 now, again over wireless and see if that works
EDIT: Have to wait till I can get a USB, can't get adb wireless to work. Keeps freezing then force closing.
 
ManlyParasite said:
I agree, it usually is user error, and it probably is here, I just don't know how any if this could have caused it. Going to try the grey 1 now, again over wireless and see if that works
EDIT: Have to wait till I can get a USB, can't get adb wireless to work. Keeps freezing then force closing.
Click to expand...


The wireless part might be part of the problem but I dont know. You can get a USB cable at just about any wal mart or walgreens. Hell Ive got them laying around everywhere.

I hope you get it straightened out ;)
 
Using my mothers USB now, hope this works! :D

EDIT: Man, I just can't get a break. The driver's aren't installing when I plug the phone in.
 
ManlyParasite said:
Using my mothers USB now, hope this works! :D

EDIT: Man, I just can't get a break. The driver's aren't installing when I plug the phone in.
Click to expand...


Make sure your firewall is off or setup to accept them. That's usually the FIRST cause for drivers not installing.
 
So im a little late to the party here. im still using 5.3.0 or something. i tried to do the lg esteem 4g from rom mon it didnt work.

I believe the first time i flashed was using a script. so with that said. Fuzzy13 does your download work with the .sh file thats included. I use linux and dont have a desktop to do all those window things you said in your directions. i am curious if i can just unzip the zip file and run the .sh file ?
 
sh RootRecoveryAIO.sh
RootRecoveryAIO.sh: line 24: [: too many arguments
RootRecoveryAIO.sh: line 661: syntax error near unexpected token `|'
RootRecoveryAIO.sh: line 661: `model=(Files/$adb shell getprop ro.product.device | tr -d '\r\n[:blank:]')'
 
LinuxLarry said:
So im a little late to the party here. im still using 5.3.0 or something. i tried to do the lg esteem 4g from rom mon it didnt work.

I believe the first time i flashed was using a script. so with that said. Fuzzy13 does your download work with the .sh file thats included. I use linux and dont have a desktop to do all those window things you said in your directions. i am curious if i can just unzip the zip file and run the .sh file ?
Click to expand...

I dont know what you mean.

The .img file is what actually flashes. I added the .img file to a previous touch install that had ver 6.0. I just swapped out the .img files.

As far as installing on Linux I have no clue. PM Playful God for that one.
 
LinuxLarry said:
sh RootRecoveryAIO.sh
RootRecoveryAIO.sh: line 24: [: too many arguments
RootRecoveryAIO.sh: line 661: syntax error near unexpected token `|'
RootRecoveryAIO.sh: line 661: `model=(Files/$adb shell getprop ro.product.device | tr -d '\r\n[:blank:]')'
Click to expand...


the above. was the 6.0.0.0 link results and below is the 6.0.1.1 link results.

Clockwork Mod Recovery
[*] Press enter to install CWM to your phone...
Pushing CWM to Phone
CWM-Installer.sh: line 17: Files/adb: Permission denied
CWM-Installer.sh: line 19: Files/adb: Permission denied
CWM-Installer.sh: line 20: Files/adb: Permission denied
Rebooting device
CWM-Installer.sh: line 23: Files/adb: Permission denied
Waiting for device to reboot
CWM-Installer.sh: line 25: Files/adb: Permission denied
Pushing Exploit
CWM-Installer.sh: line 28: Files/adb: Permission denied
Rebooting device again
CWM-Installer.sh: line 31: Files/adb: Permission denied
Waiting for device to reboot
CWM-Installer.sh: line 33: Files/adb: Permission denied
Installing CWM Recovery
CWM-Installer.sh: line 36: Files/adb: Permission denied
CWM-Installer.sh: line 37: Files/adb: Permission denied
CWM-Installer.sh: line 38: Files/adb: Permission denied
CWM-Installer.sh: line 39: Files/adb: Permission denied
Removing Trash
CWM-Installer.sh: line 42: Files/adb: Permission denied
CWM-Installer.sh: line 43: Files/adb: Permission denied
CWM-Installer.sh: line 44: Files/adb: Permission denied
CWM-Installer.sh: line 45: Files/adb: Permission denied
Finished Recovery!!!
CWM-Installer.sh: line 48: Files/adb: Permission denied
[*] Press any key to exit.


Thanks for the info. ill wait to see if PG chimes in on his own or maybe ill break down and boot into windows 7.
 
LinuxLarry said:
the above. was the 6.0.0.0 link results and below is the 6.0.1.1 link results.

Clockwork Mod Recovery
[*] Press enter to install CWM to your phone...
Pushing CWM to Phone
CWM-Installer.sh: line 17: Files/adb: Permission denied
CWM-Installer.sh: line 19: Files/adb: Permission denied
CWM-Installer.sh: line 20: Files/adb: Permission denied
Rebooting device
CWM-Installer.sh: line 23: Files/adb: Permission denied
Waiting for device to reboot
CWM-Installer.sh: line 25: Files/adb: Permission denied
Pushing Exploit
CWM-Installer.sh: line 28: Files/adb: Permission denied
Rebooting device again
CWM-Installer.sh: line 31: Files/adb: Permission denied
Waiting for device to reboot
CWM-Installer.sh: line 33: Files/adb: Permission denied
Installing CWM Recovery
CWM-Installer.sh: line 36: Files/adb: Permission denied
CWM-Installer.sh: line 37: Files/adb: Permission denied
CWM-Installer.sh: line 38: Files/adb: Permission denied
CWM-Installer.sh: line 39: Files/adb: Permission denied
Removing Trash
CWM-Installer.sh: line 42: Files/adb: Permission denied
CWM-Installer.sh: line 43: Files/adb: Permission denied
CWM-Installer.sh: line 44: Files/adb: Permission denied
CWM-Installer.sh: line 45: Files/adb: Permission denied
Finished Recovery!!!
CWM-Installer.sh: line 48: Files/adb: Permission denied
[*] Press any key to exit.


Thanks for the info. ill wait to see if PG chimes in on his own or maybe ill break down and boot into windows 7.
Click to expand...


Yeah I have no clue about Linux. That ish is out of my league but right up PG's alley. ;)
 
Fuzzy13 said:
Yeah I have no clue about Linux. That ish is out of my league but right up PG's alley. ;)
Click to expand...


I guess its moot. i got frisky and fired up windows. flashed right over.

kinda sad that i have to scroll up and down when the screen looks like it has more then enough room to display the entire menu. but its pretty nice to have a touch version of cwm. thanks
 
LinuxLarry said:
I guess its moot. i got frisky and fired up windows. flashed right over.

kinda sad that i have to scroll up and down when the screen looks like it has more then enough room to display the entire menu. but its pretty nice to have a touch version of cwm. thanks
Click to expand...


Scroll up and down for what?
 
hippiegang said:
My PC is in the shop. So can I flash it or use root explorer or something?
Click to expand...


Nope. Gotta have a PC to run the command. No way around it.


Unless you can get it to work through ROM manager you can flash the newest touch through there. Will cost 1.99 but it's up in the air whether or not it will flash. It says it flashes and it says its installed but it actually isnt. maybe they will fix it ?
 
You must log in or register to reply here.
Back
Top Bottom