Root CM12.1 UNOFFICIAL RC5

[CYCONUMNUM]

I had data working....it wasn't constant....was up and down to non existent....
rebooted a few times to see what would happen...same thing
I'm on beta 1 444 metro
I even watched it switch back to t-mobile a few times while choosing the provider

 

[CYCONUMNUM]

but, then again...he did mention that bug in the OP ...so he knows it's going on....he's doing things fast enough...
I'm glad he stuck around

last flash I did was a recovery...maybe I boogered something up before I created it and didn't even give it a chance.....

I'll flash it again tonight...fresh..see if I just leave it alone..if it'll fly straight...

even if there will be issues...I'm still looking forward to it....
it's like driving an unfinished street rod...makes me all giddy even if there are no brakes

 

[Unleashed327]

install rom
install gapps
factory wipe

try again and report back

Which ROM? I already have CM 12.1 installed. Do I flash to a stock metrics ROM? Sorry for not understanding, I only have a basic understanding of this.

 

[Mr Magic]

I need a few people who are running beta 1 to answer this question

When you receive a phone call does the screen go black, if so are you able to turn it on during the call

yes it do go black but i just hit the power button and its all good i just like to say that the sms cant send pix and i wanted to say thank you for all the hard work you have done you have made my zte zmax new again to me and i thank you for that

 

[Mr Magic]

man can not get anyone to answer this question


need feed back people, or else can not fix things

and the cam wont save to sd card when taking a pic thats the only things i found buging with it other then that its runs great and thank you again

 

[MonDillinger]

Good to have you back with a working Zmax @ MonDillinger

Good to be back djc7980

 

[MonDillinger]

I need a few people who are running beta 1 to answer this question

When you receive a phone call does the screen go black, if so are you able to turn it on during the call

My proximity sensor works fine, its off when its near my face and on when I pull it away from my face automatically. No issues there.

 

[Unleashed327]

install rom
install gapps
factory wipe

try again and report back

I went on TWRP and did a "factory reset," next I flashed the GAPPS from earlier in this forum. Now, I can install apks again. Thanks for helping, I really appreciate it!

 

[shadooblazer]

here are the kis3 ril files that I am currently using

https://www.mediafire.com/?3mcwnb44csis3l6. . I flashed these to get data on metro



can use some help trouble shooting data connection

you're not talking about this are you? http://highonandroid.com/android-howtos/how-to-enable-root-on-cm10-2-android-4-3/

I seen it, but how would rooting fix the data? I can try it but yeah. I don't know!

I am also on metropcs as well.

 

[hroark13]

Here you go @hroark13

And enjoy the beach

hey did you have a 444 phone or 442

your file does not fix my sensor issue, so I am gonna guess you had 444 on it originally

 

[MonDillinger]

hey did you have a 444 phone or 442

your file does not fix my sensor issue, so I am gonna guess you had 444 on it originally

Yeah I came from BNv2 (4.4.4) before installing this ROM. If its any help, after I flashed alpha 1 and my rotation sensor was all wonky, I flashed your fix for the sensors before [later] flashing CM12.1 beta 1

 

[hroark13]

as soon as i get a call the screen goes blank and will not turn on until the call is over.

OK flashing this should fix it, and make your sensors normal, it worked for me, my phone was a Univision model running 4.4.2, I am not sure if this will fix a different model

https://www.mediafire.com/?518x7wizt3p2vu2

 

[hroark13]

Yeah I came from BNv2 (4.4.4) before installing this ROM. If its any help, after I flashed alpha 1 and my rotation sensor was all wonky, I flashed your fix for the sensors before [later] flashing CM12.1 beta 1

when you pulled that file, were you on beta 1 ?

 

[MonDillinger]

when you pulled that file, were you on beta 1 ?

Yes

 

[hroark13]

OK flashing this should fix it, and make your sensors normal, it worked for me, my phone was a Univision model running 4.4.2, I am not sure if this will fix a different model

https://www.mediafire.com/?518x7wizt3p2vu2

what I had to do to make this file, push the stock sensor hal to the system, delete sns.reg, boot cm12
then pull that files to keep
then push back the x9180 sensor hal, and sensors worked

to test more, after sensors worked, I flashed the sns.reg i provided to fix the stock rom, and then boot back in to cm12, and it was screwed up again, and screen was going black during calling

went back ino recovery and pushed the new sns.reg I generated and just pulled, booted back to cm12 and sensors worked and no black screen


So bottom line, the sns.reg files needs to be generated in cm12 with stock HAL or maybe a 444 rom that should have the stock HAL, and can not be gernerated by the X9180 HAL we are using in beta 1

not a big problem, as long as we have the files to flash now if we need to

 

[hroark13]

Yes

it is weird that it did not fix my issue, it should have

did you have the Univiosn, Walmart Family, or T-Mobile model ?

 

[MonDillinger]

it is weird that it did not fix my issue, it should have

did you have the Univiosn, Walmart Family, or T-Mobile model ?

T-Mobile version

 

[hroark13]

Yes

oh were you on 4.4.2 B22 or a different build ?

 

[MonDillinger]

oh were you on 4.4.2 B22 or a different build ?

I was on whatever build the stock 4.4.4 version of the MetroPCS variant was, that's the base of Butternoob v2, BNv1 is based on Android 4.4.2 T-Mobile build. Maybe try getting someone with a Metro ZMAX to send you the file to see if it helps?

 

[hroark13]

I was on whatever build the stock 4.4.4 version of the MetroPCS variant was, that's the base of Butternoob v2, BNv1 is based on Android 4.4.2 T-Mobile build. Maybe try getting someone with a Metro ZMAX to send you the file to see if it helps?

i already fixed it, I was able to generate a good file for my self

there are different builds of 442, the lates version for Univion is build 22, not sure what it is for TM

 

[MonDillinger]

i already fixed it, I was able to generate a good file for my self

there are different builds of 442, the lates version for Univion is build 22, not sure what it is for TM

T-Mo's was build 22 as well

 

[hroark13]

I need some one to test this x9180 RIL on beta 1

https://www.mediafire.com/?ic5wi6yt7f4e4l7

if it does not you can just reflash the rom zip, no need to wipe or anything

 

[antiHackmasta]

I need some one to test this x9180 RIL on beta 1

https://www.mediafire.com/?ic5wi6yt7f4e4l7

if it does not you can just reflash the rom zip, no need to wipe or anything

I have metro originally running 444 I never flashed butter but I have flashed all of you zips for fixing ril and sensors. I set my apns to ip6 and radio works fine.

 

[SeemsLegit]

is anyone able to connect to adb or no?

 

[AJ Casanova]

New to the entire community. I've read every single page before I signed up to make this post. I've done some jailbreak work and advised other developers in the iOS community. I came from the stock 4.4.4 made a full backup. Installed this ROM. The only issue I have is with the data going in and out also with Netflix app. I think it both might have something to do with the file the is reads the device info from. Did so searching and discovered it's a file call build.prop I'm going to compare the file to the stock one and see if I can get something going on. My sensors work fine no lag. No screen off when I'm in a call. However I flash the patch the the developer posted if I need it.