I have an idea for something that might be causing the problem. Can you try flashing this one?
PC36IMG_Clockwork_2.6.0.1_2.zip
PC36IMG_Clockwork_2.6.0.1_2.zip
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I have an idea for something that might be causing the problem. Can you try flashing this one?
PC36IMG_Clockwork_2.6.0.1_2.zip
I wanted to point out.... it's ok to flash both the CM and Gapps file at the same times. Just flash CM then flash Gapps. -- Whenever you get to this point.
Seriously, that worked? Try flashing the Clockwork PC36IMG.zip again to see what it does. That other one I had you try earlier was the CW recovery.img placed in the PC36IMG.zip for the hboot 2.10 recovery (that you just flashed). Weird. Just to verify, when you reboot into recovery now, you have the stock recovery? Go ahead and try the CW PC36IMG.zip now. After that flash RA from ROM manager again to get back to where you were.
Yea, I'm as surprised as you here. When I reboot with vol down I get to hboot screen. then when I choose revovery I get a black screen with a small phone and red triangle with an "!" in it...
tryin CW (only to get back to RA though...)after I verify if this is OK
Ok, that's expected. Try flashing CW again (use that second one linked to, first). If it doesn't work, just reflash RA from ROM manager for now, and we can take it from there. I guess it *could* be a bad image, but as I've said, a lot of people have used it with no problems. Plus you tried the RA PC36IMG files as well with no success, right?




I think my Evo has some sort of dyslexia, when it wants to anyway. I downloaded PC36IMG_Clockwork_2.6.0.1_2.zip and trimmed it to PC36IMG.zip, rebooted. It read it, got the blue bar and everything, but nothing.
I rebooted into mykFroyo no issues and used ROM to flash RA2.2.2. so....
![]()
side question...is there a way to see which kernel is running?
I did a search and the only thing I got was use setCPU to check, and if I have the kernel I think I do they don't play nice together.
And that's the same thing that happened with all the other recovery PC36IMG.zip files, including the RA ones? When I get home from work, I'll try the same file on my phone. I'd think if other people (or a lot at least) had this issue, somebody would have said something by now. I'll still check all the same just to make sure. If all seems fine, I'm thinking you might have some kind of hboot issues. As Mr. Ed seemingly had this same problem, but fixed most issues by unrooting and flashing a RUU, I might suggest you do the same.
taking a look at unroot steps...if i did do this, would I be able to use my RA nand backup if i get back to where I am now?
welcome to the forums!!!!!!!!!!!!!!!!!!!!!!I've been at this for over 9 hours now. I started with Revolutionary, Did everything except Create a Back up File using PC361IMG. The root was successful. Now i tried a out Rom and wasn't to crazy about it and decided to try and go back to My normal evo/htc lay out. (I had been using Rom Manger) My Evo's system was working off of 2.3.3. This is were the first problem occurred. Looking back i see i missed out on one of the steps and have been trying to recover what i lost since. But Rom Manger did ask me before I choose to check out this new Rom if i'd like to back my current one up, which is the normal layout and I did. In asking to go back.. my phone became a brick. I decided not to give up and figure out how to get into the Sim card, cause my computer wasn't seeing that i was connected at all. I found a way to Load a Recovery zip with a PC261IMG.zip. I downloaded them.. I did not open the zips before hand just placed them in the sim file. After that the phone recognized this process and restored it back to it's factory setting. Yay losing everything except whats on the Sim. Now I decided after all this frustration that i was going to UN root the phone and get the phone back to its original state. So i followed some advice off of You tube, but then got Hit a Black wall. The Phone in the Middle with a Red Triangle.. Now both files (PC26..) i used before are not working now. When i first get to the boot screen, in green writing it says it can not read and the picture or art is wrong. I try to Resolve and end up back at the black screen. I've looked and downloaded recovery zips from Clockwork to Amon to Stock Recovery and playing the switching game. I have now finally hit a brick wall and i don't know what to do. Since the phone is still rooted is it better to just apply a new Rom and continue on? Is there a way i can get back to how my phone once was before this? Or am i stuck with this factory setting for now on.. Please Help.. Anybody..