• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

Root JB Update 2.06.653.6

M

m_c_ael

Newbie
Just got a push for a new update. 15.5 mb. Not finding anything about it online. Saved to my sd card and I will upload upon request ! It says "software improvements"
edit: I'm not installing this update. Don't wanna risk losing root.


Any input community?
 
Probably a good idea to wait. I can confirm that there's an OTA available as I just checked
 
I've already updated, I personally have not found any huge differences really. I'll post again tomorrow after I've done some deep digging
 
Update: everything is still fine root is good still have s-off no funny glitches performance is still very satisfactory. All in all this is not an update that you need to be afraid of. All it real did was give me a new AAinfo.txt with an updated build.number
 
Be careful with the new updates they are pushing. The latest update for my S3 had a lot of new security additions to help block attaining recovery and root.

A RECOVERY FIX had to be made for the guys who took the update. They were not able to access any files to flash while in recovery.

Just a heads up fellas. Those of you who've been around awhile know not to accept any of the updates. For the newcomers, one of these new updates might shut you out from attaining root until one of the Devs can get it figured out. Be careful!
 
Yeah I will be keeping an eye here for news on the update. Phone asked to update it the other day but I didnt for now. Waiting for proper info from the devs around here
 
russellvone said:
Update: everything is still fine root is good still have s-off no funny glitches performance is still very satisfactory. All in all this is not an update that you need to be afraid of. All it real did was give me a new AAinfo.txt with an updated build.number
Click to expand...

It's all good guys. I've been running the update since yesterday.
 
Just installed the update. Almost ready for release to you guys. (as a stock rom (fully working this time LOL)) I just need either the build.prop from the first JB update or the build.prop from this OTA if youve already installed it.

Thanks guys
 
[Hide] ro.ril.oem.ecclist=911
ro.ril.disable.fd.plmn.prefix=23402,23410,23411,23420
ro.ril.enable.sdr=0
ro.ril.set.mtusize=1422
ro.product.locale.language=en
ro.product.locale.region=US
ro.com.google.clientidbase=android-htc
ro.com.google.clientidbase.yt=android-boost-us
ro.com.google.clientidbase.am=android-boost-us
ro.com.google.clientidbase.gmm=android-htc
ro.com.google.clientidbase.ms=android-boost-us
ro.wifi.hotspotUI=0
ro.bt.tetheringUI=0
ro.usb.tetheringUI=0
ro.product.brand=htc
ro.product.model=C525c
ro.cdma.home.operator.alpha=Boost Mobile
gsm.sim.operator.alpha=Boost Mobile
gsm.operator.alpha=Boost Mobile
ro.cdma.home.operator.numeric=311870
gsm.sim.operator.numeric=311870
gsm.operator.numeric=311870
gsm.sim.operator.iso-country=us
gsm.operator.iso-country=us
ro.da1.enable=true
ro.watch.appid=com.sdgtl.watch.k2cl_45_jb_s
dev.defaultwallpaper=/system/customize/resource/scene_wallpaper_htc_default.jpg
dev.deviceimage_large=/system/customize/resource/K2_PLC_187x370.png
dev.deviceimage_small=/system/customize/resource/K2_PLC_32x58.png
# begin build properties
# autogenerated by buildinfo.sh
htc.build.stage=2
ro.aa.rid=23
ro.cwkey=SPCS_003
ro.aa.skulist=653
ro.aa.customizationid=533692
ro.aa.taskid=324416
ro.onecid=1
ro.aa.project=K2_CL_JB_45_S
ro.aa.mainsku=653
ro.aa.modelid=PL8011000
ro.prot=true
ro.aa.romver=2.06.653.5
ro.aa.maincid=SPCS_003
ro.aa.report=com
ro.aa.cidlist=SPCS_003
ro.com.google.clientidbase=android-htc
ro.build.id=JZO54K
ro.build.display.id=JZO54K
ro.build.version.incremental=209682.5
ro.build.version.sdk=16
ro.build.version.codename=REL
ro.build.version.release=4.1.2
ro.build.date=三 6月 19 18:52:18 CST 2013
ro.build.date.utc=1371639138
ro.build.type=user
ro.build.user=
ro.build.host=abm017
ro.build.tags=release-keys
ro.product.model=K2CL
ro.product.brand=htc
ro.product.name=k2cl
ro.product.device=k2cl
ro.product.board=
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=HTC
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8960
# ro.build.product is obsolete; use ro.product.device
ro.build.product=k2cl
ro.build.description=2.06.653.5 CL209682 release-keys
ro.build.description=2.06.653.5 CL209682 release-keys
ro.build.changelist=209682
ro.build.fingerprint=htc/k2cl/k2cl:4.1.2/JZO54K/209682.5:user/release-keys
ro.build.characteristics=default
ro.build.project=K2_CL_JB_45_S:324416
ro.product.version=2.06.653.5 710RD
ro.build.languageremove=0
ro.build.sense.version=4.5
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=2.06.653.5 CL209682 release-keys
ro.build.fingerprint=htc/k2cl/k2cl:4.1.2/JZO54K/209682.5:user/release-keys
ro.build.characteristics=default
keyguard.no_require_sim=1
# end build properties
#
# system.prop for surf
#

rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.egl.hw=1
debug.compbypass.enable=1
debug.mdpcomp.maxlayer=3
#debug.composition.type=dyn
debug.enabletr=true
ro.hwui.renderer.disable_opaque=true
hwui.render_dirty_regions=true
dev.pm.dyn_samplingrate=1
ro.sf.lcd_density=240
#dalvik.vm.heapsize=36m
dalvik.vm.heapsize=128m
dalvik.vm.heapgrowthlimit=64m

# +SSD_RIL
ro.baseband.arch=msm
# -SSD_RIL

# Default network type.
# 8 => CDMA/EHRPD/LTE mode preferred.
ro.telephony.default_network=8

#
# system props for QCRIL
#
persist.radio.snapshot_enabled = 1
persist.radio.snapshot_timer = 22

#
# system props for the cne module
#
persist.cne.UseCne=vendor
persist.cne.UseSwim=false
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
persist.cne.nsrm.mode=false

ro.hdmi.enable=false

#audio
lpa.decode=true
tunnel.decode=true
htc.audio.global.state=0
htc.audio.global.profile=0
htc.audio.q6.topology=0
htc.audio.swalt.enable=1
htc.audio.swalt.mingain=14512
htc.audio.alc.enable=1
# System props for soundhound
persist.htc.audio.pcm.samplerate=48000
persist.htc.audio.pcm.channels=2

#system props for the MM modules

media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=false

#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data_netmgrd_mtu=1410

#system props for time-services
persist.timed.enable=true

# System props for audio
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=digital

# System prop to select audio resampler quality
af.resampler.quality=255

# System prop for camera
ro.product.main_camera = 5M
ro.product.front_camera = 1.6M

wifi.interface=wlan0
wifi.supplicant_scan_interval=15
wifi.softap.interface=wlan0
wifi.softapconcurrent.interface=wl0.1
ro.product.wifi = 802.11 a/b/g/n

#
# system prop for opengles version
#
# 131072 is decimal for 0x20000 to report version 2
ro.opengles.version=131072

#system prop for switching gps driver to qmi
persist.gps.qmienabled=true

# System property for cabl
ro.qualcomm.cabl=0

#
# System prop for sending transmit power request to RIL during WiFi hotspot on/off
#
ro.ril.transmitpower=true

#
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=false

# support sdcard2
ro.sdcard2 = 1
# For internal fat file system
ro.phone_fat = 1

# Properties of BTLA stack
service.brcm.bt.activation = 0
service.brcm.bt.srv_active = 0
service.brcm.bt.hcid_active = 0
service.brcm.bt.btld = 0
service.brcm.bt.btld_pid = 0
service.brcm.bt.avrcp_pass_thru = 0
service.brcm.bt.avrcp_toggle = 1
service.brcm.bt.local_name =
service.brcm.bt.FTS_ROOT_FOLDER = /storage
service.brcm.bt.wbs = 1

# Hardware info
ro.product.processor = Dual Core
ro.product.ram = 1GB

ro.bt.chipset = Broadcom BCM4334
ro.bt.profiles = 12806403
ro.bt.stack.version = 5.0
ro.bt.stack = Broadcom BTL-A
ro.bt.version = 4.0

# Hardware info - Bluetooth
ro.product.bluetooth=4.0
ro.product.display_resolution = 4.3 inch WVGA resolution

#
# ADDITIONAL_BUILD_PROPERTIES
#
debug.nfc.fw_download=true
debug.nfc.fw_boot_download=false
ro.vendor.extension_library=/system/lib/libqc-opt.so
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=Ring_Synth_04.ogg
ro.config.notification_sound=pixiedust.ogg
ro.carrier=unknown
ro.config.alarm_alert=Alarm_Classic.ogg
drm.service.enabled=true
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=4.1_r5
ro.service.dpsvr.enabled=true
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
[/spoiler]
 
For some reason build.prop didn't update. I'll have a friend flash it on their phone. Or someone soff already who has the time flash it please. The new build prop will allow us to get the notification for 4.2 when it releases. Thanks. Okay so it's uploading. Its from twrp so if you want to flash, use twrp. There's no md5 or anything so it's just throw it in your backups folder inside a respective folder and go. Also devs feel free to use this to base a new rom on. I'll do something with it eventually. Its honestly a little smoother and more stable even... Ill probably do a deodex and cleaned up base this weekend for everyone. Give it 2 hours before downloading


http://files.simonsickle.com/?dir=k2_cl/Sense/SystemDump_9-24-13
 
CWM can not install the update for me go figure. Oh well not a big deal I can wait for a proper CM rom or something tho. Need a proper Bluetooth stack and not the one built around sense since they broke a number of things with that setup.
 
Topken said:
CWM can not install the update for me go figure. Oh well not a big deal I can wait for a proper CM rom or something tho. Need a proper Bluetooth stack and not the one built around sense since they broke a number of things with that setup.
Click to expand...

It's a twrp backup like it says in the post...
 
palmtree5 said:
In that case, I got a status 7 trying to install via CWM
Click to expand...

Due to the way htc creates these updates it won't flash stock in cwm. I always have to mod mine. I just need the new build prop. For some reason I can't get it to update the patch.. Basically though this update seems a little more stable
 
simonsimons34 said:
Due to the way htc creates these updates it won't flash stock in cwm. I always have to mod mine. I just need the new build prop. For some reason I can't get it to update the patch.. Basically though this update seems a little more stable
Click to expand...

I can pull it from the zip and post it

EDIT: Here ya go!

EDIT: That file originally ended in .p and so it apparently wasn't meant to be opened in a text editor
 

Attachments

Just saw the nag of it today while I was at work. I wonder if this phone will be as nagging/pushy to install the update like my S2 was...

Wouldn't the Voodoo OTA RootKeeper help in this situation? Seems like that's what it's made for.
 
@simonsimons34 I pm you a link to build.prop. sorry if I am late, I was watching this thread but could not understand what was being asked.
 
Has anyone tried to protect their root via Voodoo OTA rootkeeper and restore it with this? I know the last time I used it on a phone that rather peskily forced an OTA update, what I did was temporarily un-root, do the update, then restore root with the app and that worked on there.

I know there is a disclaimer about the app not working on Android 4.3... what does this new Update put the One SV at?
 
You must log in or register to reply here.
Back
Top Bottom