• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

Root Let's Get CM Onto Avant!

--Edit-- I'm a idiot, didnt notice it was a different device .-.

On another Topic I cant really tell, but it seems like my battery goes down faster while idling than with the stock rom, hard to tell, but took it off the charger at 100% like 3 hours ago and its already at 95%, atleast its better than it was before I calibrated it, before I calibrated it went from 100% to like 70% in only a hours time

Oh I thought you guys couldn't get anything at all from the back camera.

And I think you're right about the battery drain. The CPU seems to spend a lot of time at 1.2ghz in comparison to stock. However Device Control reports that it also spends time in the deep sleep state, so something seems wrong with the way the clocks are controlled when the phone is active.

Even switching to the conservative governor didn't fix much.:(
 
It does, just fine. I have the same issues as you guys.
hLRHzRC.jpg
Really strange, we had another person on here with the core and he couldnt get it flash at all, maybe he wasnt doing something right.
 
Really strange, we had another person on here with the core and he couldnt get it flash at all, maybe he wasnt doing something right.
Yeah I read through his posts... They were pretty discouraging. I thought it wasn't going to work at all.

I flashed it through TWRP, just wiping system and performing a factory reset. It took a while but it booted up fine, none of the upgrading/starting apps stuff.
 
Yeah I read through his posts... They were pretty discouraging. I thought it wasn't going to work at all.

I flashed it through TWRP, just wiping system and performing a factory reset. It took a while but it booted up fine, none of the upgrading/starting apps stuff.

that’s interesting, spec wise they are very similar
 
I can also say along with my battery lasting less time with this rom, it seems to run quite a bit hotter, not hot enough to really be a problem, but my hands do get quite hot when using it, even for somthing not intensive on the device
 
I can also say along with my battery lasting less time with this rom, it seems to run quite a bit hotter, not hot enough to really be a problem, but my hands do get quite hot when using it, even for somthing not intensive on the device
Yeah I would usually come home with a respectable 25%, but with this ROM, I had to use it a bit less and came back with 4%. :l

But hey, these increased speeds sure make it snappy! :D
 
Yeah I would usually come home with a respectable 25%, but with this ROM, I had to use it a bit less and came back with 4%. :l

But hey, these increased speeds sure make it snappy! :D

must be because its using all cores, on stock I always put it on powersaver and restricted performance, with the ability to underclock/over in the future we could get around that
 
must be because its using all cores, on stock I always put it on powersaver and restricted performance, with the ability to underclock/over in the future we could get around that
The cores turn off fine, but what I said about the cores being stuck at 1.2 GHz doesn't seem to be true...

It looks like the process of even manually watching the core speeds causes core #1 to speed up. It tends to stay around 1 GHz to 1.2 GHz, occasionally dropping down to somewhere around 600 MHz. :/

H4R8njR.jpg

wDH2aB0.jpg
So now I have no idea as to why the battery life is worse. BTW I know it says deep sleep is unused, but I didn't turn off my screen in these shots. :p
 
Last edited:
hmm, ive just started to make my own kernel using samsung source, first time ever trying such and got almost everthing setup not sure why im getting error 2 on the touchscreen input drivers using make clean && make mrproper but maybe ill get something here in a bit, not that we need one but hey trying to learn lol
 
hmm, ive just started to make my own kernel using samsung source, first time ever trying such and got almost everthing setup not sure why im getting error 2 on the touchscreen input drivers using make clean && make mrproper but maybe ill get something here in a bit, not that we need one but hey trying to learn lol
Gotta start somewhere and a custom kernal could be a good breakthrough for other kernals for better battery life and such! :)
 
If u want to make a custom kernel use the g386w kernel source it more complete plus on the touchscreen issue make-3.81 is required because make-4.0 and up errors out on the touchscreen Makefile i jave been trying to fix it to compile with make-4.0 but i haven't been able to fix it yet
How's the bug squishing coming? Any progress on the video playback or camera?
 
If u want to make a custom kernel use the g386w kernel source it more complete plus on the touchscreen issue make-3.81 is required because make-4.0 and up errors out on the touchscreen Makefile i jave been trying to fix it to compile with make-4.0 but i haven't been able to fix it yet

awesome will do, that must be whats wrong then lol, I just wanted to play around with this maybe help out once I get a hang of it
 
I wanted to know something. Why is the board in build.prop the msm8226? I'm sure that the board in our phone is the msm8926.

Does it make any difference?
 
I'm new to the developing world and have the galaxy avant I have been syncing aokp cm and aosp repos and plan on making some different roms for this device id love some help along the way I have plenty of free time and some help with debugging the ROM to
Whatever you need help with, I'm sure there is at least one person here with an answer and we're always up for flashing test builds :D lol so welcome aboard, we're always glad to see new faces!
 
I'm new to the developing world and have the galaxy avant I have been syncing aokp cm and aosp repos and plan on making some different roms for this device id love some help along the way I have plenty of free time and some help with debugging the ROM to
Just upload a ROM that boots and we'll get right on it! :D
 
If u want to make a custom kernel use the g386w kernel source it more complete plus on the touchscreen issue make-3.81 is required because make-4.0 and up errors out on the touchscreen Makefile i jave been trying to fix it to compile with make-4.0 but i haven't been able to fix it yet

if i used the cores source code for the kernal would the kernal work on the avant as well or do i have to use the avant source code on the avant
 
if i used the cores source code for the kernal would the kernal work on the avant as well or do i have to use the avant source code on the avant

it should work on the avant as well, i hit a snag yesterday after getting around the last problem but gonna keep looking into the issue
 
Good news everyone. I've donated my avant to help further development for this phone so we'll have another developer on board pretty soon. I'm not sure exactly what ROM/ROMs he'll be working on since I left the choice up to him but there's more aosp goodies soon to come.

This sounds pretty good. Hopefully we can get help stabilizing this Rom and eventually get lollipop CM12. This phone has so much potential its a joke lol. Cant wait to see what he or she can do for us.
 
Back
Top Bottom