• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

Root One Stop Shopping for Fascinate Kernels

NOsquid said:
-75 seems smoothest for my phone, could be in my head. That's what the otb's and adryn had for mid range so kinda makes sense.

I want a big uv on low end, about 75 mid range, but more uv on top since that seems stable. Imnuts said he would make it, he's really cranking them out
Click to expand...
Yeah Im actually back on nem's 1200uv. Same -100mv on 800Mhz on down just like imnuts but also with the OC and mini uv at the top. Im still advocating for a -50mv 1200Mhz step since imnuts is cranking out so many kernels. Sadly it does seem like more than 5 steps is a no go as usual
 
NOsquid said:
A lot of people had camcorder problems, that's why the last ones nemesis released were standard voltage

I never had to pull a battery but the cam did fail to record a couple of times, worked other times
Click to expand...

Yeah, i even had camcorder problems when i was running stock. Back then i would just get the failed to record messages, but this is much more severe as the phone freezes and the only way out of it is to pull the battery.

I tried wiping the cache and that worked great until this morning, when it started freezing again. Seems the longer the phone is on the higher chance of hitting this issue.

I'm going to try going back to 1100sv and see how that works.

You guys are all extremely helpful.
Thanks!
 
wowser said:
Yeah, i even had camcorder problems when i was running stock. Back then i would just get the failed to record messages, but this is much more severe as the phone freezes and the only way out of it is to pull the battery.

I tried wiping the cache and that worked great until this morning, when it started freezing again. Seems the longer the phone is on the higher chance of hitting this issue.

I'm going to try going back to 1100sv and see how that works.

You guys are all extremely helpful.
Thanks!
Click to expand...
You know based on these comments I tried the camcorder out myself [1st time in months] using the 1200uv and all was fine
 
saps said:
You know based on these comments I tried the camcorder out myself [1st time in months] using the 1200uv and all was fine
Click to expand...

Maybe it's just my phone. I just flashed 1100sv and was able to record a 2min clip with no problems. I'll try again tonight without rebooting the phone and see what happens.

Thanks again.
 
OP expanded to include imnuts kernels which comes in voodoo and nonvoodoo; stock and varying degrees of uv
 
OK I had OMJ change the thread title now too. I put a whole bunch of jazz in the OP now. Hoping to truly have as much of a one stop shop as possible. So in addition to nemesis now we have imnuts, adryn and even some of the older stuff from jt and geeknik.

There should truly be something for everyone now looking for any kernel for our SF
 
Does anybody know which of these non-voodoo kernels have the bln built in? I tried adrynalyne's with the DL09 package and I know that one didn't have it.
 
ktez said:
Does anybody know which of these non-voodoo kernels have the bln built in? I tried adrynalyne's with the DL09 package and I know that one didn't have it.
Click to expand...
any and all of imnuts 01/08 do and he has an assortment linked in the 1st post
 
saps said:
OK I had OMJ change the thread title now too. I put a whole bunch of jazz in the OP now. Hoping to truly have as much of a one stop shop as possible. So in addition to nemesis now we have imnuts, adryn and even some of the older stuff from jt and geeknik.

There should truly be something for everyone now looking for any kernel for our SF
Click to expand...

Thanks! Now all we need is your in-depth review of each along with your all-time favorite :eek:
 
wowser said:
Thanks! Now all we need is your in-depth review of each along with your all-time favorite :eek:
Click to expand...
:pEven if I did that it still would not guarantee that my fav will work for you. I will say my fav is undoubtedly nemesis2all's 1200 test 5. But since each phone is so individual you must try and see for everything
 
saps said:
:pEven if I did that it still would not guarantee that my fav will work for you. I will say my fav is undoubtedly nemesis2all's 1200 test 5. But since each phone is so individual you must try and see for everything
Click to expand...

I'm running 1/8 Imnuts 100 Voodoo5, like you were before going back to nemesis2all's 1200 test 5. I might try that one next. What was the major difference that made you switch?
 
PeterGunz said:
I'm running 1/8 Imnuts 100 Voodoo5, like you were before going back to nemesis2all's 1200 test 5. I might try that one next. What was the major difference that made you switch?
Click to expand...
The extra 200Mhz at the top end. Im playing a lot of gameloft games and DD these days and the extra speed to my perception makes things smoother. The two kernels are exactly the same between 100-800Mhz as like imnuts nemesis has the uv at -100mv on those steps. The difference of course is instead of the top being 1000Mhz and -100mv from stock, its 1200Mhz and -25mv from stock. imnuts -100mv I would say would be my second choose and frankly if you dont play somewhat intensive 3d games it probably makes little difference if you top end is 1Ghz or 1.2Ghz. I just like having the extra 20%
 
Sorry if this has been addressed already, I'm using the phandroid app atm and it's too much of a pita to search through the thread. I just flashed imnuts 125 voodoo last night and bln doesn't seem to be working. Is it supported in this kernel? When I run the test it goes on for maybe a second then turns off...not sure if the same thing happens when I actually get a notification...all I know is the leds aren't on even if I've received a message.
 
grin0048 said:
Sorry if this has been addressed already, I'm using the phandroid app atm and it's too much of a pita to search through the thread. I just flashed imnuts 125 voodoo last night and bln doesn't seem to be working. Is it supported in this kernel? When I run the test it goes on for maybe a second then turns off...not sure if the same thing happens when I actually get a notification...all I know is the leds aren't on even if I've received a message.
Click to expand...
yes bln is supported in imnuts 01/08 kernels as long as you have blinky 2.3/2.4 installed
 
saps said:
imnuts has new kernels voodoo and nonvoodoo 1/13, in OP
Click to expand...

Saps, just to be sure before I do it. If i want to flash one of these (it will be my first time since going Voodoo5) I can just go to red recovery, wipe cache, and install zip from sd over the kernel I have now?

Problems only come from doing nonvoodoo over voodoo and the opposite.
 
PeterGunz said:
Saps, just to be sure before I do it. If i want to flash one of these (it will be my first time since going Voodoo5) I can just go to red recovery, wipe cache, and install zip from sd over the kernel I have now?

Problems only come from doing nonvoodoo over voodoo and the opposite.
Click to expand...
100% correct you got it :). Well outside of your the opposite. You can always throw voodoo over non just not...the opposite;):p
But yeah your top paragraph is spot on and technically the cache wipe is optional, although advised my many
 
saps said:
100% correct you got it :). Well outside of your the opposite. You can always throw voodoo over non just not...the opposite;):p
But yeah your top paragraph is spot on and technically the cache wipe is optional, although advised my many
Click to expand...


Hahaha I have no clue why I added the opposite. Okay, going to try the 1/13 -100
 
xceebeex said:
Post back with your impressions on 1/13. I just flashed the 1/8 voodoo last night and I am liking it so far!
Click to expand...

What 1/8 are you running?

The 1/13 that hes running is imnuts its a undervolted kernel, just a heads up not all phones take well to undervolt(mine being one) but thats not to say that I dont recommend everyone that is already running voodoo not to see if they can. But just letting you know to make sure that you leave the kernel that you are running stable on your sd card or make a nandroid before flashing just in case your phone doesnt take it you can flash back.

If you are running imnuts 1/8 forget everything I just said ;)
 
nitsuj17 said:
i believe imnuts stated all of his kernels built yesterday are -100 regardless of what they say on the list
Click to expand...


Looks like he pulled the 1/13's and is updating to 1/14, but there ae no kernels listed. Issue with notifications I believe. I am going to wait this one out and stick with the 1/8 100.

So, the difference with the new one is that they are all undervolted -100 but just scale differently depending on the numerical value?
 
You must log in or register to reply here.
Back
Top Bottom