• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

Rooting Galaxy S2 - Dummies Guide

I don't think I used to right CF, that is why this happened.

I also followed the instructions from a different website not this one!

the CF was CF-Root-SGS2_XX_XEO_LPQ-PROPER-v5.4-CWM5

I am not certain what the kernal was beforehand, and stupidly can't check it now, such a n00b!
 
nikkib7854 said:
I don't think I used to right CF, that is why this happened.

I also followed the instructions from a different website not this one!

the CF was CF-Root-SGS2_XX_XEO_LPQ-PROPER-v5.4-CWM5

I am not certain what the kernal was beforehand, and stupidly can't check it now, such a n00b!
Click to expand...

Oh dear!

Here we go... We need to flash a stock firmware for you in that case, to get you up and running and to be able to re-root.

I'm guessing that you don't have your CSC code details and so all we can do, as you cannot boot up, is to flash a generic, stock, Samsung, firmware to your phone.

Was your phone running carrier branded firmware?

Which country are you in?

Do you need a language other than English?
 
nikkib7854 said:
Living in Australia

Don't need another language to english

It was locked to Optus,
Click to expand...

This is the stock Optus firmware, Android 4.0.4, for the GT-i9100. You will need to download this and flash it with Odin, following the instructions under the heading, "My firmware is not eligible for ICS yet but I want it now!", in post #1, here.

This will put the Optus, ICS, firmware on your phone with a stock un-rooted kernel. You can then follow the steps in post #1 and #2 of this thread to root.

I was trying to root it to unlock it!
Click to expand...

Rooting does not unlock your phone.
 
nikkib7854 said:
Awesome, I'll give that a go.

Ah ok, I was told rooting was like jailbreaking. Needs to be done before u can unlock it
Click to expand...

No, you were told wrong I'm afraid. You will need to either obtain the unlock code from your service provider or take it to your friendly local mobile phone shop.
 
Sorry again, my phone is fixed now, but after flashing that firmware my phone has reverted to this..

samsung galaxy s2 GT-i19100
android version. 4.0.4
Baseband version. i9100XXLQ6
kernel version. 3.0.15-1056084
dpi@DELL168 #3
SMP PREEMPT Wed Aug 22 22:55:24 KST
2012
Build Number: IML76D.XWLPW
Pda:I9100XWLPW
PHONE:I9100XXLQ6
CSCI9100OPSLP6

I'm trying to Root it now but because of these details am having trouble. I did notice in post http://androidforums.com/galaxy-s2-international-all-things-root/627235-rooting-4-0-4-a.html

Ironass you said to try LPW I can't seem to find a CF Root for that, only the firmware u just gave me. Any ideas where I can find this?
 
Hey guys,

I've been running Siyah 5.0.1 with Vanilla Rootbox, but I wanted to see if I could get better battery performance under 4.1.4 as tha was what I was getting the best batterylife on before, however, when I flashed the kernel now it doesn't boot. Just gets to the gok logo then blank. I can get to Recovery, but that's about it.

Any ideas?

Edit: It appears that Rootbox flashes its own kernel. So I'm assuming there is no way of getting a siyah kernel to work with this rom?
 
Hi

I am using Rootbox 3.2, and also Dorimanx Kernel.

After flashing the ROM, I then flash the kernel in recovery before restarting the phone.

Boots up fine on Dorimanx.

You may want to give this kernel a try, as it has lots of battery tweaks.
 
Sydney99 said:
odd. you seem to be doing everything right

you have unzipped the CF-kernel file yes??
Click to expand...

ok after giving it a break i have tried rooting my s2 again.

i am using lpt kernal and odin 3. after pressing start odin runs but then it says it fails.

the message window in odin says


<id:0/010> complete(write) operation failed


i just want launch my s2 and laptop against the wall.

please please help. im desperate here.
 
shaqs77 said:
ok after giving it a break i have tried rooting my s2 again.

i am using lpt kernal and odin 3. after pressing start odin runs but then it says it fails.

the message window in odin says


<id:0/010> complete(write) operation failed


i just want launch my s2 and laptop against the wall.

please please help. im desperate here.
Click to expand...

Oh dear!

Can I just check that you have...

ironass said:
Step 1.

Ensure that your phone is fully charged.

On your phone, go to... Settings > Applications > Developement > USB debugging and check the box.

(On ICS ROM's.. Settings > Developer options > USB debugging and check the box)
Click to expand...

and that you are turning light blue...

ironass said:
Step 3.

Connect your phone, still in Download mode, to the PC using the USB lead. If you have successfully connected to Odin you should see the ID:COM box in Odin turn yellow or light blue, (depending on which version of Odin you are using).
Click to expand...
 
Hi, I am really new to the rooting subject, so I am worried because there's a chance to cause some damage and I really need to do this because I have to record some videos of the Smartphone screen with Screencast that requires root.

Smartphone model: Samsung Galaxy S2 GT-I9100
Kernel version: 2.6.35.7-I9100UHLB2-CL966147
Build number: GINGERBREAD.UHLB2

What CF-Root do I choose?

Thanks
 
BrnTsw said:
Hi, I am really new to the rooting subject, so I am worried because there's a chance to cause some damage and I really need to do this because I have to record some videos of the Smartphone screen with Screencast that requires root.

Smartphone model: Samsung Galaxy S2 GT-I9100
Kernel version: 2.6.35.7-I9100UHLB2-CL966147
Build number: GINGERBREAD.UHLB2

What CF-Root do I choose?

Thanks
Click to expand...

Hello and welcome to Android Forums BrnTsw! :)

The UHLB2, Gingerbread, build is very old, February 2012, by Android standards and there has been an update for your CSC code, which I guess is ZTO, in May 2012, to ICS, Android 4.0.3.

Since there is no CF-Root kernel to match your existing, stock, kernel of LB2, you could upgrade your firmware, using either the Samsung Kies PC Suite or Odin to the latest Android 4.0.3 and then match the new stock kernel with a CF-Root version.
 
Thanks!

Well here's the thing, I'm developing an application that is olny being tested on Android version 2.3, so I'm not sure if it's gonna work on ICS. There's no other way? If there isn't, if I install the ICS, is it easy to re-install Gingerbread if I need? Sorry for this questions, but I have to finish recording the videos of my app tomorrow.
 
BrnTsw said:
Well here's the thing, I'm developing an application that is olny being tested on Android version 2.3, so I'm not sure if it's gonna work on ICS. There's no other way?
Click to expand...

You could try using CF-Root kernel LA4. That may work for you.


If there isn't, if I install the ICS, is it easy to re-install Gingerbread if I need? Sorry for this questions, but I have to finish recording the videos of my app tomorrow.
Click to expand...

If you move up to ICS you will have to manually flash your existing Gingerbread firmware, UHLB2, after first doing a Factory Reset and a re-installation of all your app's and settings.

You could try rooting with the LA4 CF-Root kernel and if that does not work you will have to flash your existing firmware, with it's stock, un-rooted, kernel, using Odin.
 
Thanks man

I just updated my firmware, now the kernel version is 3.0.15-I9100VJLP7-CL371396 and base number IML74KVJLP7
 
ironass said:
Oh dear!

Can I just check that you have...



and that you are turning light blue...
Click to expand...

cheers ironass for replying

the light does turn blue when i connect and ive done all of the above too.

my battery is not brilliant. i could charge it til it says 100% then when i unplug it i comes up with a random figure. when connected to my laptop it is charging the phone.

i am truelly stumped.
 
shaqs77 said:
my battery is not brilliant. i could charge it til it says 100% then when i unplug it i comes up with a random figure. when connected to my laptop it is charging the phone.
Click to expand...

Sounds like you may need to re-calibrate your battery.

Just double checking...

Could you post your, "Version", details...

ironass said:
Tip: Now is a good time to make a note of your phone's, "Version" in case you ever need to revert back from rooting. To do this, open the dial pad and type in the following:- *#1234#

This will give you 4 lines of information about your phones firmware and CSC code, etc: You should make a careful note of all this information and keep it somewhere safe.
Click to expand...

and your original, stock, kernel details...

ironass said:

Kernel. Your choice of CF-Root kernel depends on the kernel you currently have installed on your phone.

Settings > About phone > Kernel version (make a note of this in case of problems)
Click to expand...
 
Hi! I have the same problem like nikkib7854 . I rooted my Samsung galaxy s 2, and now it wont turn on... I am stuck on the black screen wit yellow triangle sign... What should I do? Maybe I used wrong kernel, I am not sure. I have just these informations about telephone:

pda. I9100BULPG
phone: I9100BULP8
CSC: I9100SIMLP6
build info: thu sep 13 10:24.55 KST 2012

I hope you can help me... :)
 
You must log in or register to reply here.
Back
Top Bottom