• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

Root Official CyanogenMod 13.0 for LG L70 D320 D320n D325 MS323

Mystery_Flasher said:
I own both L70 and G2 802 and never had this issue with CM13. Make sure you have a latest nightly on board and a proper aboot file. Might be something related to your apns as well - check those.
Click to expand...
apn and all the other things all i did check many times... strangly both of them are vodafone and both of are LG phones... Both are the same... I try this ROM not just one day... I used to try this ROM for more than month.. update every nightly... But nothing changed... So i did decide yo ask here... Maybe some thing about RADIO or else... I really need this fix... I may send more info if any thing need yo solve this...
 
ClauvanPdST said:
After the first boot you will be able to resize the system partition for maximum capacity.
Remember to unmount the partition /system ;):)
Tested in CM3, CM14 and CM14. 1.




Try doing this in TWRP recovery mode:

Step 01
Go to:
Mount --> (Uncheck Micro SDcard)
You just unmount your MicroSD

Step 02
Go to:
Wipe --> Advanced Wipe --> (Check only Micro SDcard) --> Repair or Change the File System --> then, "Repair File System".
Click to expand...
I try this but i finish with "error repairing"
now my phone say unsupported sd card and i m trying with mini partition tool but when i try to format just disconect from my comp. :(
 
stevce80 said:
I try this but i finish with "error repairing"
now my phone say unsupported sd card and i m trying with mini partition tool but when i try to format just disconect from my comp. :(
Click to expand...
I have problem with my sd , unsopprted sd i think i check read only in mount in twrp and now with new sd card i cant get in twrp i m stuck on twrp logo any help???
 
Kamil Mazik said:
Code: 
648.305346] [LGE MBHC] High Impedance Headset(Apple) is detected. Enable MICBIAS and report 4pin headset.
[  648.311614] msm8x10-wcd-i2c-core msm8x10_wcd_codec: msm8x10_wcd_codec_enable_micbias 1
[  648.315411] msm8x10-wcd-i2c-core msm8x10_wcd_codec: msm8x10_wcd_codec_enable_micbias 2
[  648.336460] [LGE MBHC] Headset is Inserted. jack_type:0x3
[  653.121876] [LGE MBHC] wcd9xxx_dce_handler: enter
[  653.195764] [LGE MBHC] wcd9xxx_dce_handler() DCE:582, button:7
[  653.197198] [LGE MBHC] Unsupported button event. Ignore button event.
@vm03 Could you fix it?
Click to expand...
Without headset it problematically... I have a wired headsets only with one button.
 
stevce80 said:
I try this but i finish with "error repairing"
now my phone say unsupported sd card and i m trying with mini partition tool but when i try to format just disconect from my comp. :(
Click to expand...

To use the "Mini Partition Tool" on your SD, you need to take the SD of your smartphone and insert it on your PC.

Be sure you selected the correct storage device;
Remove the partitions;
Add a FAT32 primary partition.


stevce80 said:
I have problem with my sd , unsopprted sd i think i check read only in mount in twrp and now with new sd card i cant get in twrp i m stuck on twrp logo any help???
Click to expand...

Try:
Shutdown;
Remove your SD;
Power again without the SD.

If your SD is good, the problem is solved. Otherwise, replace with a new one.

Adoptable Storage uses EXT4 partition format. To work with EXT4 partitions, use linux or some Live USB as GParted Live USB.
So... You can check corrupted partitions and access and copy data to another storage drive.
 
@ManWithNoFace ,

I don't know.

But it is possible for you to try and bring the information to the forum.

1. Firstly BKP;
2. Resize the partition with GParted.
3. Create the second partition in EXT2 or EXT3 for Link2SD.

And, post the results of your test.

There are some people here in the forum that use Link2SD.
It's been a while since I've been using it.

Let's wait for their positioning.
 
Last edited:
I think i didnt ask question well, when i m in twrp my sd is recognise but when i turn on my phone it says sd card is not supported and i cant format stuck on 20 percent is there any solution to fix this problem or sd is for garbage, i try to repartition in twrp in ext4 and than reboot but i have the same problem thanks guys for effort
 
https://www.cmxlog.com/13/w5/

err02: Device incorrect or not supported. Device may have been transitioned to a newer version of CyanogenMod.

Last cm13 released before transition to cm14.1:
cm-13.0-20161204-NIGHTLY-w5.zip (381.59 MB)
sha1: 95247d112a221da35a591d4f5f16d7fbac756805

Latest stable stable cm13 release before upgrading to android api 74: cm-13.0-20161107-NIGHTLY-w5.zip
Yes. The link has been out for some time. I do not know where to lower again. In case someone has. Please share a new link.

Obs: I want to make that clear. Within my tests this version was the one that did better.


Goodbye CM13 and... Come on Official CM14.1.
 
Personally, I have a L70 D325F8, and no cm13 I install works with the SIM CARDS, there is some Fix or patcher for the SIM CARDs to be detected, is my only problem with this ROM: c, sorry for the English ... use translator rs
 
RodrigoFS said:
Personally, I have a L70 D325F8, and no cm13 I install works with the SIM CARDS, there is some Fix or patcher for the SIM CARDs to be detected, is my only problem with this ROM: c, sorry for the English ... use translator rs
Click to expand...

In the last version and of CM13 there was update of API. In which the SuperSU up to 2.78 SR4 broke the recognition of Dual SIM.
And, the xposed framework v86.x caused bootloops.

If you use any of these solutions, try to update them.

http://download.chainfire.eu/supersu-latest

It may also be the wrong aboot.bin.

Flashable zip:
L70 D325 or D325f8(abootPatched)20140703[TuksOID].zip
 
ClauvanPdST said:
Several possibilities were presented.
Talk about what you did. And, what solved the problem.

If it was aboot.bin. You no longer need to flash this file. But keep it for future needs.
Click to expand...
My problem was with my SIM cards that were not identified on the device (L70 D325f8-BR-PT) when I put the CM13 ... and make the flash file (Aboot.bin) I was able to fix ... and it worked.
Now I installed CM14 and it worked too (of course, with some errors still in CM14)
D
 
RodrigoFS said:
My problem was with my SIM cards that were not identified on the device (L70 D325f8-BR-PT) when I put the CM13 ... and make the flash file (Aboot.bin) I was able to fix ... and it worked.
Now I installed CM14 and it worked too (of course, with some errors still in CM14)
D
Click to expand...

The CM14.1 or LineageOS must be applied through a clean installation.

You will see that the problems of apps that open suddenly close will no longer occur.

Clean installation:
TWRP BACKUP
Wipe (system - dalvik - cache - data - internal - android secure)


Tip: Go directly to LineageOS (Continuation and Evolution of CM14.1).
 
Last edited:
ClauvanPdST said:
The CM14.1 or LineageOS must be applied through a clean installation.

You will see that the problems of apps that open suddenly close will no longer occur.

Clean installation:
TWRP BACKUP
Wipe (system - dalvik - cache - data - internal - android secure)


Tip: Go directly to LineageOS (Continuation and Evolution of CM14.1).
Click to expand...
ok.

I noticed a problem, connect to the computer in MTP mode or just charging, the computer starts a blue screen and reboots, but when switching to other usb modes the computer recognizes the device
This in both CM13 and CM14
 
RodrigoFS said:
ok.

I noticed a problem, connect to the computer in MTP mode or just charging, the computer starts a blue screen and reboots, but when switching to other usb modes the computer recognizes the device
This in both CM13 and CM14
Click to expand...

Its not a CM issue.

Uninstall the windows lg drivers!

Search for the universal usb driver from google for android devices.


I leave windows install native drivers for usb devices.
 
You must log in or register to reply here.
Back
Top Bottom