Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
What recovery are you using?I was using stock 4.4.4 before the wipe. Also, I don't quite understand the partition updater thing you mentioned. Is there a download for the partition?
You are probably using a recovery built for the xt1034. If you have an xt1031, try one of the recoveries I posted recently and you should be good.I get a status error 7 when trying to install one of the roms have tried 3 of these roms so far and same error
that my supposedly my device is a xt1034 when its a xt1031
Edit never mind fixed it had to edit the updater script![]()
I already fixed it installed without problems just had to remove the get.build.prop lineYou are probably using a recovery built for the xt1034. If you have an xt1031, try one of the recoveries I posted recently and you should be good.
DISCLAIMER: By using this rom, you agree that you are the only one responsible for anything good or bad that may occur. Use at your own risk.
For Boost Mobile Moto G only.
Deodexed, debloated, and rooted Stock KXB21.14-L1.57.
falcon_KXB21.14-L1.57_deodexed.zip
List of removed files and download link (click "Spoiler" below):
/app/Books.apk
/app/Drive.apk
/app/Magazines.apk
/app/Music2.apk
/app/PlayGames.apk
/app/PlusOne.apk
/app/Quickoffice.apk
/app/Videos.apk
/app/YouTube.apk
/etc/motorola/MotoDemo/Moto_Demo.mp4
/etc/motorola/MotoDemo/MotoImages/Picture1.jpg
/etc/motorola/MotoDemo/MotoImages/Picture2.jpg
/etc/motorola/MotoDemo/MotoImages/Picture3.jpg
/etc/motorola/MotoDemo/MotoImages/Picture4.jpg
/etc/motorola/MotoDemo/MotoImages/Picture5.jpg
/etc/motorola/MotoDemo/MotoImages/Picture6.jpg
/priv-app/CQATest.apk
/priv-app/DemoMode.apk
/priv-app/fswriter.apk
/priv-app/GuideMe.apk
/priv-app/MotoAssist.apk
/priv-app/MotoCare.apk
/priv-app/MotoCareInt.apk
/priv-app/SprintID.apk
/priv-app/SprintInstaller.apk
/priv-app/SprintZoneG.apk
DOWNLOAD:
falcon_NOT_FLASHABLE_KXB21.14-L1.57_removed.zip
Rooted Stock KXB21.14-L1.57.
falcon_KXB21.14-L1.57_root.zip
Unmodified Stock KXB21.14-L1.57.
falcon_KXB21.14-L1.57.zip
Mirror links here
NOTE: Your device needs to have already been updated to 4.4.4 before using this ROM. If you have not updated to 4.4.4 (KXB21.14-L1.57), you will need to flash this partition updater AND the rom of choice.
NOTE2: This zip is unsigned so you may need to disable signature verification in CWM before flashing.
NOTE3: Your device must have CWM/custom recovery to flash ROMs.
Flash in CWM as follows:
- Download ROM
- Put the ROM on your internal sdcard or flash drive if you have an OTG cable
- Reboot to CWM Recovery
- MAKE A BACKUP!!!!!!!!!!
- Wipe data/Factoy reset
- Install ROM zip from sdcard or usbdisk
- Reboot
- Enjoy!
Other Downloads:
falcon_Tweaked_4.4.4_Mms_White.zip - Modified stock Messaging app that shows the time text messages were sent instead of the time you receive them (deodexed rom only).
falcon_KXB21.14-L1.57_kernel.zip - Stock 4.4.4 kernel
falcon_KXB21.14-L1.57_recovery.zip - Stock 4.4.4 Recovery
Hey question. I have a "sacrificial lamb" Moto G that currently has the soak test 5.0.2 that you helped make available on this site. I want to knock it back down to 4.4.4, however I believe you said something on the lines that there would be a problem because of the LP Bootloader and that damned ripple effect. Would I run into issues if I down graded this phone back to 4.4.4?
You can go back to 4.4.4. You can either flash one of SuperR's zips or restore a 4.4.4 backup, but you will have the screen ripple. All you need to do though is turn the screen off and back on and it goes away.
Edit: just don't flash the 4.4.4 partition updater or anything else to try downgrading the bootloader or you will have a brick!


Did you update the partitions?It runs really well. Thanks for sharing.
Yea I ran the partition update first. Didn't try it without to see if it would work.Did you update the partitions?
Trying now. I've been super busy, but I can't believe I'm just seeing this.Seriously guys!!! Nobody has posted about this? Or tried it? Its official 5.1 yuminess! [emoji16]
Make sure your /data partition is formatted back to f2fs after running GPE which is ext4 /data.I flashed a GPe for XT1032, now I'm on 41.1A bootloader. I tried your partion zip and the 5.1 zip, it tells me I'm a XT1032 device now. Modding the updater script to skip the assert, it flashes fine but then it doesn't boot past the GPe unlock screen. CM12 Falcon nightly boots fine, the GPe for XT1032 has a deep sleep->reboot issue.
Any ideas on how to get back to stock and then soak?
Should I flash this first?
http://motofirmware.center/files/fi..._444_kxb2114-l157_57_release-keys-cid9xmlzip/
Ah, did not think of that. Indeed it is still ext4, as I have not formatted the entire partition (/sdcard/) since GPe.Make sure your /data partition is formatted back to f2fs after running GPE which is ext4 /data.