• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

Root [ROM] MidnightRom: Sense 1.5.4

45fa72f5-b543-93aa.jpg


Over clocked 2.9.1a
 
drachma said:
xthedakmanx - can i make a request?

can you fork your build into 2 versions:
a) Anthrax kernel for overclockers, powerusers etc (1.1.5 fork)
b) stock kernel for those of us who want all things to work but the rest of the supercharged rom goodness? (1.1.2 fork)

thanks
Click to expand...

I agree. I'm more of a functinoality kind of guy. :thumbup:
 
When I flash this latest update, can I just wipe cache and davlik or do I have to do a factory reset and lose all my settings?? Thanks
 
thetomk said:
I agree. I'm more of a functinoality kind of guy. :thumbup:
Click to expand...
Everything works on anthrax kernel. I honestly have seen nothing that isn't functioning.

jreink01 said:
When I flash this latest update, can I just wipe cache and davlik or do I have to do a factory reset and lose all my settings?? Thanks
Click to expand...

Yes you can, but if you have problems, wipe everything.

thebryceee said:
3.0.1 is up
Click to expand...


Update will come tomorrow probably
 
You should add the jb google voice search also. It's stable enough to use as a daily app and also enables offline speech to text.
 
It's designed to shut off one core (and both cores when screen is off) when the performance is not needed to save battery. If you flash chad's kernel that is..
 
Kind of new to this. I extracted the boot image because I am S-ON. It doesn't let me install due to .img file. How do load this rom correctly please? Any help would be greatly appreciated. I have purchased 4-Ext also but every time I try to boot it always says Bad Message [Time.
 
pancho32392 said:
What about the 4g doesn't it reboot when you turn on the 4g
Click to expand...
Hm...I don't have 4G where I live sadly. What exactly is going on with it?


djones1005 said:
Kind of new to this. I extracted the boot image because I am S-ON. It doesn't let me install due to .img file. How do load this rom correctly please? Any help would be greatly appreciated. I have purchased 4-Ext also but every time I try to boot it always says Bad Message [Time.
Click to expand...

It kinda a pain in the butt to be honest when you aren't s-off, but it's pretty easy to do!

Evo 3D CDMA (Shooter) | Unlimited.IO

Just download the file at the bottom of the page where it says WINDOWS (For Virgin Mobile Evo V only) (I figure you're using windows for this) and follow the instructions on the page ^_^ Took me like 5 minutes honestly. Then you'll never have to worry about flashing anything other then just the ROM .zip again!
 
New version being uploaded right now. It'll be tomorrow before it's fully up though. But here's the changelog



1.1.6 8/2/2012 (Latest)
MD5:359a3a307fa5683944e426a3d5a14263

-Updated kernel to 3.0.2
-GooManager now works! This means auto notifications of ROM updates for everyone from now on! YAY!
-Added Google Now
-Added ICS Search Widget
-Added Virgin Mobile Minutes Checker (Really awesome app. After you login using it, it displays a small toast for a second before and after calls showing how many minutes you have left. Can also display when your plan runs up, how many minutes you can use every day so you don't go over, etc etc)
-Updated Adobe Flash
-Updated Youtube
-Updated Gmail
-Updated hosts file for newest ad blocking

List of kernel changes (directly from Anthrax Development | Android Development Community)
--> RLS 03.0.2-Qualcomm/CAF/GOOGLE Base
built with a new compiler - let me know how it works
[specific to the installer]
added scripts to the installer to backup and remove thermald and mpdecision
--> its still up to you to remove any conflicting init.d or init.qcom.post_boot.sh scripts
re-added back in zram activation script
[specific to the actual kernel]
upgraded compiler/toolchains to linaro 07/2012 release (july 2012)
fixed warnings during build
add SIO I/O Scheduler
add SmartAss_v2 CPU Scheduler

--> RLS 03.0.1-Qualcomm/CAF/GOOGLE Base
1.94 GHz over clock - just cause the kernel supports it, dont mean your phone does
(anyone complains about freezes, lockups, or reboots on ANY clock speed over 1.56, i will cap these @ 1.56)
new acpuclock8x60.c file
anthrax custom cpu tag will reflect YOUR current max speed not the kernel's max speed in cpu identification
reduced l2 and fsb speed for anything over 1.8ghz (add stability)
increase GPU bus bandwidth (get rid of any bottleneck on the actual bus itself)
add lagfree (ziggy's version)
set lagfree as default governor

--> RLS 03.0.0-Qualcomm/CAF/GOOGLE Base - built using defaults from msm8660_defconfig
please note: a lot of the patches that I applied to the HTC base are actually part of this new base, so even though they are not listed below, they are there. Since I did not personally apply the patch, I did not list it below.
requires 2.89 Sprint Firmware (or the official ICS Virgin Mobile firmware) to work correctly.
sprint native hotspot compatible netfilters (me)
increased lcd back light min/max range (me)
add scsi drivers (required for usb mass storage devices) (me)
add usb mass storage drivers for external devices (me)
enable HID (human interface devices) via usb and bluetooth (me)
add HID generic drivers (me)
add HID SONY PS3 Controller driver (me)
increase video framebuffer (video memory) (me)
increase audio buffer (me)
+mA support (charging over MHL/HDMI if your cable supports it, and mine does :) ) (me)
Updated BT and enabled enhanced feature set (faster BT xfer rates, better audio when streaming, better beats support) (me)
add 160mhz 2d gpu clock (power-saver) (me)
CleanCache/zCache (me, caf, and kernel.org)
USB OTG / OTG HostMode (me)
make headset notifications singlethreaded (me)
enable profiling in the kernel (gabe)
enabled BCMDHD wifi driver (provide support for future roms, and other roms such as AOKP and MIUI) (me and HTC // twisted umbrella for the idea of having 2 wifi drivers in 1 kernel)
custom hardware identification tag (me)
custom cpu identification tag (me)
Use AC charging for unknown chargers (me)
Kernel based MPDECSION w/ sysfs (based off of shooter 2.17 mpdecision binary source) (me and qualcomm)
allow for fastcharge with SYSFS interface (chad0989)
add kernel based THERMALD service (me, but based off of faux123 sensation driver, and fixed by dodava)
interactive governor: fix possible Division by zero (me)
dynamic LED brightness (dont remember)
disable GENTLE_FAIR_SLEEPERS (me)
adjust read-ahead (me)
update bluetooth drivers, add support for l2cap, hid, and amp (me and caf)
allow GPU OC **not OCed be default** (320 for 3D and 266 for 2D) (me)
build vfp for neon (me)
allow SYSFS control of GPU MAX Clock (me)
adjust wifi sensetivity levels (me)
build optimizations for linaro 4.6 (me, with help from showp1984)
allow SYSFS control of CPU Voltage (faux123)
set clock during boot to 1512 (me)
allow for faster CPU (me)
allow for faster l2 cache (me)
allow for faster fsb (me)
Sense 4 GPU fix (me and qualcomm)
port wimax drivers from qualcomm linux 2.6.38
100% STOCK QUALCOMM MSM-8660 GENERIC/UNIVERSAL Base Kernel (qualcomm)
 
xthedakmanx said:
Hm...I don't have 4G where I live sadly. What exactly is going on with it?




It kinda a pain in the butt to be honest when you aren't s-off, but it's pretty easy to do!

Evo 3D CDMA (Shooter) | Unlimited.IO

Just download the file at the bottom of the page where it says WINDOWS (For Virgin Mobile Evo V only) (I figure you're using windows for this) and follow the instructions on the page ^_^ Took me like 5 minutes honestly. Then you'll never have to worry about flashing anything other then just the ROM .zip again!
Click to expand...

To turn on the 4g you have to reboot it and if you want to turn off the 4g you got to rebooted again its goes back and forward
 
pancho32392 said:
To turn on the 4g you have to reboot it and if you want to turn off the 4g you got to rebooted again its goes back and forward
Click to expand...

Hm...I just tried it on the latest version. It seems to turn on, and off, but then doesn't wanna turn on for some reason.


Weird.

It'll probably be fixed in a future kernel release, but it isn't that big of a deal where I'd say it's a huge issue :P
 
It kinda a pain in the butt to be honest when you aren't s-off, but it's pretty easy to do!

Evo 3D CDMA (Shooter) | Unlimited.IO

Just download the file at the bottom of the page where it says WINDOWS (For Virgin Mobile Evo V only) (I figure you're using windows for this) and follow the instructions on the page ^_^ Took me like 5 minutes honestly. Then you'll never have to worry about flashing anything other then just the ROM .zip again![/QUOTE]

Seriously, I have to do this wire trick? Lol.
 
You must log in or register to reply here.
Back
Top Bottom