Root [Boost Mobile] Hroark Kernel Over-clock bug reports

[shinru2004]

I have made this thread for anyone testing the over-clock test kernel i posted. if you are experiencing any issues related to the OVER-CLOCK please post them here

Yes, we know the handset speaker doesn't work

Yes, we know the screen doesn't come back on after shutting off (Tianma Panel)

the above issue's will be resolved in time, i am after any adverse effects of the over-clock and to provide higher clocked kernels for better performance and testing.

1.8Ghz is very unstable on this phone, when benchmarking in Quadrant and Nenamark the phone froze and had to do a battery pull. the official high clock is 1.7 stable so far

As you may notice if testing i have made the over-clock default to 1.4Ghz this is the normal running speed for the over-clock. It is set after booting to ensure no harm is done to your device. Voltage is only raised +150 instead of +250 over default values to ensure your battery life

EDIT: Let me note that all of the OC Kernels made where tested on my rom and NOT stock, and for good reason honestly

If you would like to buy me a beer

 

[shinru2004]

+Bump.... Keep this thread at the top of the thread list, post issues with OC here

 

[MrBobo]

Phone freezes with stock b08c and overclock kernel, either 7 or 11, stable with stock kernel or new kernel

 

[mholloway]

B08 2.6.35.11oc froze when typing with vib.key press.B08 2.6.35.7oc no issues

 

[Alsaces Daddy]

Hiccup freezes with 7 but no battery pull necessary. I have the "later" warp with Tianama and have had no problems with sleep and wake. Will try phone calls and let you know.

No sleep/wake issues or headset. Good to go.

 

[shinru2004]

How many of you have the new revision of the warp? i just want to see if the issues with "Hiccups" & "Freezing" is isolated to a certain version or if it is sporadic.

 

[mholloway]

Bought mine 8 months ago B08

 

[Alsaces Daddy]

I have the new one. Bought it a month ago. I am having troubles with service issues. It keeps disappearing in the same spot. Usually I have 2 or 3 bars.

 

[hroark13]

I have the new one. Bought it a month ago. I am having troubles with service issues. It keeps disappearing in the same spot. Usually I have 2 or 3 bars.

we need more detail

are you having service issues all the time or just when you flash one of the new kernels

what wich kernel did you flash

.7
.11
.7 oc 16
.11 oc 16



what ROM are you on





.

 

[MrBobo]

Weirdness , i took the advice to turn off haptic on the keyboard and no freezes yet after an hour

Edit: in a twist of irony it froze right as i hit send

 

[Alsaces Daddy]

.7 OC 16. Never had service issues before where I live but when it goes to sleep mode service disappears. No rom. Bought it a month ago. B08C

 

[hroark13]

.7 OC 16. Never had service issues before where I live but when it goes to sleep mode service disappears. No rom. Bought it a month ago. B08C

try the .11 OC 16

see if it does the same

then try

.7 with no OC (the one in my OP) see if it does the same

then try

.11 no OC (the one in my OP) see if it does the same


of course you do not have to do any of this, but it would be nice to know if there is a difference between them

 

[cartersball]

Running stock B08c and the .7 oc kernel on a Warp purchased in Nov. 2011. No issues yet after a few hours of use. I cannot test vibe functions however because.the.vibe on this device has not worked in over 3 months.

 

[MrBobo]

Giving7 oc a run with voltage control set at 1024

Edit so far no freeze at stock limit on 7 oc kernel, i have the early hardware phone, got it in December

 

[shinru2004]

Giving7 oc a run with voltage control set at 1024

Edit so far no freeze at stock limit on 7 oc kernel, i have the early hardware phone, got it in December

are you on B08b or B08c?

 

[MrBobo]

B08c , phone runs fine with voltage control set to 1024, but freezes if i even only bump it up to 1113

 

[aladdin99]

ok, bo8c no oc works fine. tried the original bo8c 1.6 oc and the bo8c 1.8 oc kernels, let them sit 10 min and no they did not boot.

My phone did the same thing. If i pulled the battery after 10mins and reboot it just turns off after a few mins of sitting at green android. No oc seems fine.

The phone is running B08c everything prior to B08c has reboot issues.

Edit:
I tried downloading the file directly to the phone with Dolphin browser. I am about to try through the computer and see what happens.

 

[jetx2x]

I also am experiencing a signal drop... I will experiments with it tommorow but as of right now my signal seems to drop whenever I leave it idle... ill try and isolate what makes it drop after I get out of school tommorow
Edit: I'm running .7 1.6oc with shinjitsu btw

Sent from my N860 using Tapatalk 2 Beta-5

 

[ron580]

running b08c with hroarks .7 oc 1.6 kernel and have no problems at all.
does anybody have the b08c oc 1.8 kernel i can test out

 

[Alsaces Daddy]

The link for .11 Oc 16 is bad.

The service issues seem to be linked to the wifi. It only happens when I have it on.

 

[mholloway]

B08 2.6.35.11oc froze when typing with vib.key press.B08 2.6.35.7oc no issues

2.6.35.7 oc causes some lag in keyboard,turn it down to 1024 its fine

 

[Spiyder]

Any ideas why the no oc kernel works on some phones but not the oc'ed one dosent?

Sent from my N860 using Tapatalk 2 Beta-5

 

[shinru2004]

I think it has to do with the b08c update. Cant say for sure but I run b08b and have none of the issues experienced by you guys. Of my kernel has some stuff hroarks doesnt like swap support and memory compaction

 

[Rally 517]

I've been trying both kernels on bo8c adjusted setcpu to all levels phone freeze. Gonna try bo8b

 

[MrBobo]

I will be testing this on your ROM soon shin, I have been working mostly off the b08c stock to test so far, the oc kernel works if I turn the OC back to the stock level, which defeats the purpose... B08C did make my phone stable (old hardware version) so I don't like to go back to B08... I thought your ROM was good though, I have been holding off for the update though...