• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

Root [ROM] CTMod 3.80 (04/06/13)

So to get apps to automatically install to SD card, I partition the card with the instructions on the first page of the CTMod thread, then install CTMod according to the instructions, then install the apps and Im done?

also what is "SSM"
 
Bloodawn you are the ****ing man !! 3.4 is the best thing my phone has experienced since having me as it's owner, lol. This is like being in the DeLorean waiting for the lighting to strike. Great job professor.
 
I need some help getting that type of battery usage. Right now my voice calls are at 62% when I go to the graph you have below. I'm only getting roughly 2hrs on battery with a full charge. Any advice ?

wetbiker7 said:
Battery consumption isn't bad at all . I've got almost 11 hrs this go round and still got 48% left . SWEET ! :D

screenshot-1333608150997.png
Click to expand...
 
tigron said:
I need some help getting that type of battery usage. Right now my voice calls are at 62% when I go to the graph you have below. I'm only getting roughly 2hrs on battery with a full charge. Any advice ?
Click to expand...

Same here.
Even with juice defender.
Juice defender extends it from 2hrs to 2hrs 45min.
Its something but it helps.
 
tigron said:
I need some help getting that type of battery usage. Right now my voice calls are at 62% when I go to the graph you have below. I'm only getting roughly 2hrs on battery with a full charge. Any advice ?
Click to expand...
Stop making so many voice calls? lol. Just kidding.
 
Anyone else having problems downloading from mediafire? I cant download 3.4.
When I click download it says:
here was a problem with your download

We apologize, but we are having difficulties processing your download request. Please be patient while we try to repair your download request.

Restarting download in: 3 seconds
Click to expand...
 
Hey blood I think maybe its volt control.
I only opened it up just right now.
Didn't even make changes and it started lagging just by opening up tapatalk (one of the non laggers)
 
Rarewolf said:
Hey blood I think maybe its volt control.
I only opened it up just right now.
Didn't even make changes and it started lagging just by opening up tapatalk (one of the non laggers)
Click to expand...

you said its been happpening since 3.3 bro, voltage control wasn't included in that version. and its working fine for me.
 
Bloodawn said:
you said its been happpening since 3.3 bro, voltage control wasn't included in that version. and its working fine for me.
Click to expand...

I know...
That's! Whats bothering me.
I just went from tapatalk to chase banking app.
And whammo! Lag and crash.
I only posted on the dim pro changer for CTMod and cm
 
what do I set the voltage control to? the settings are the default settings, but I experience lag occasionally and I have no clue why. I was going to reinstall 3.4 to solve the problem. what do you suggest?
 
Set the I/O to sio and the Gov to On-demand . After you do that , start with 800MHz and work your way up . If it starts crashing on you , dial the MHz back . Simple . The minimum MHz can be turned up if you are having startup lag after the phone has been asleep . You can also play with the Govs. , I've found that InteractiveX works really well .


EDIT : If I were you and still had the problems after making the changes that I mentioned , I would wipe that sucker and start from scratch .
 
Rarewolf said:
I know...
That's! Whats bothering me.
I just went from tapatalk to chase banking app.
And whammo! Lag and crash.
I only posted on the dim pro changer for CTMod and cm
Click to expand...

Im getting the same kind of issues. With mine I its always the browser that freezes. I thought it was Chrome, but its happening with the stock browser also. In the past 24hrs Ive Odined, reflashed, tried different sd cards, and it always freezes. Im at a loss for what the problem is.
 
wetbiker7 said:
Set the I/O to sio and the Gov to On-demand . After you do that , start with 800MHz and work your way up . If it starts crashing on you , dial the MHz back . Simple . The minimum MHz can be turned up if you are having startup lag after the phone has been asleep . You can also play with the Govs. , I've found that InteractiveX works really well .


EDIT : If I were you and still had the problems after making the changes that I mentioned , I would wipe that sucker and start from scratch .
Click to expand...

deadline >

=p
 
tigron said:
I need some help getting that type of battery usage. Right now my voice calls are at 62% when I go to the graph you have below. I'm only getting roughly 2hrs on battery with a full charge. Any advice ?
Click to expand...

Rarewolf said:
Same here.
Even with juice defender.
Juice defender extends it from 2hrs to 2hrs 45min.
Its something but it helps.
Click to expand...


It is always best to run the battery all the way down until the phone shuts off then start the recharging process . Also , heat will suck the life out of a battery . Try keeping your phone cool and out of direct sunlight . You will want to keep your screen brightness turned down too . Last but not least , staying off the phone REALLY helps a lot . :p

If you're not using your phone that much and you've done some of the things that I've mentioned above , there's a good chance that your battery is going bad .
 
Bloodawn said:
deadline >

=p
Click to expand...


:D When I was testing the kernel for Kato , he asked me to keep it set on sio when we were trying to get my phone stable . I've kept it on that setting since switching from CM7 and have had no issues at all . :p

I/O = sio
Gov = On-demand
Max = 900MHz
Min = 200MHZ

My phone is running better than ever .
 
wetbiker7 said:
Set the I/O to sio and the Gov to On-demand . After you do that , start with 800MHz and work your way up . If it starts crashing on you , dial the MHz back . Simple . The minimum MHz can be turned up if you are having startup lag after the phone has been asleep . You can also play with the Govs. , I've found that InteractiveX works really well .


EDIT : If I were you and still had the problems after making the changes that I mentioned , I would wipe that sucker and start from scratch .
Click to expand...

I will try your suggestions and report back. I was just using stock settings in VC.

One other question though, why when I have the max Mhz set to 900, then I do a benchmark test with Antutu, the test results show 946Mhz?
 
VoltronMaximus said:
I will try your suggestions and report back. I was just using stock settings in VC.

One other question though, why when I have the max Mhz set to 900, then I do a benchmark test with Antutu, the test results show 946Mhz?
Click to expand...


That's because that's what your processor is overclocked to now , it's a 946MHz processor . When you do the benchmark test , it will read the max clock speed of the cpu even though you may not have it turned all the way up .
 
wetbiker7 said:
That's because that's what your processor is overclocked to now , it's a 946MHz processor . When you do the benchmark test , it will read the max clock speed of the cpu even though you may not have it turned all the way up .
Click to expand...

Makes sense.

So far this thing is running like a champ. All I did was set it to sio and leave the Gov to on demand. Thanks for the info cat-daddy:cool:

Edit: I take that back. Its now back to freezing. My settings are-
I/O sio
Gov On demand
Min 480
Max 900
 
VoltronMaximus said:
Makes sense.

So far this thing is running like a champ. All I did was set it to sio and leave the Gov to on demand. Thanks for the info cat-daddy:cool:

Edit: I take that back. Its now back to freezing. My settings are-
I/O sio
Gov On demand
Min 480
Max 900
Click to expand...

lower your max clock to 850 and see if you still freeze. if you do try 825
 
You must log in or register to reply here.
Back
Top Bottom