Matlock
Android Enthusiast
Just added a new Option to Section 8 - Flashing Roms. Now it shows you how to Flash your ROMs on-the-go using the Recovery menu instead of ROM Manager.
Enjoy!
OPTION 2 - RECOVERY (Manual)
RECOVERY
PUT ROM ON SDCARD
Before you begin, connect your device using the Mirco USB cable and place the Custom ROM you downloaded onto the Root of your SDCard. This means put the Zip file in the main folder itself. Not in any Sub-Folders of any sort.
TURN OFF DEVICE
Power down the device by holding the Power Button for 2 seconds. Allow it to shutdown completely. Wait about 10 seconds before next step.
BOOTLOADER
Hold down VOL DOWN + POWER until device boots into a White Screen.
Move to RECOVERY by using the VOL DOWN toggle and select by using POWER button.
BACKUP
Make sure to do a NAND backup of your bevice prior to Flashing a ROM. Refer to Section 3.
WIPE
Use the VOL DOWN toggle to move to Wipe and select by pressing the POWER button.
Toggle down to Wipe date factory reset and select by pressing the POWER button.
Once that has complete, toggle down to Wipe Dalvik-cache and select by pressing the POWER button.
Once that has complete, select Return.
FLASH ZIP
Use the VOL DOWN toggle to move to Flash zip from sd card.
Find the ZIP file Custom ROM you want to flash by using the VOL DOWN toggle. Select it using the POWER button.
Your ROM will now be installed onto your device.
BACK TO RECOVERY
After the installation has completed, you will be brought back main menu, use the POWER button to select the first option “reboot system now”. And your device will reboot itself like normal.
Enjoy your new ROM!
Enjoy!
OPTION 2 - RECOVERY (Manual)
RECOVERY
PUT ROM ON SDCARD
Before you begin, connect your device using the Mirco USB cable and place the Custom ROM you downloaded onto the Root of your SDCard. This means put the Zip file in the main folder itself. Not in any Sub-Folders of any sort.
TURN OFF DEVICE
Power down the device by holding the Power Button for 2 seconds. Allow it to shutdown completely. Wait about 10 seconds before next step.
BOOTLOADER
Hold down VOL DOWN + POWER until device boots into a White Screen.
Move to RECOVERY by using the VOL DOWN toggle and select by using POWER button.
BACKUP
Make sure to do a NAND backup of your bevice prior to Flashing a ROM. Refer to Section 3.
WIPE
Use the VOL DOWN toggle to move to Wipe and select by pressing the POWER button.
Toggle down to Wipe date factory reset and select by pressing the POWER button.
Once that has complete, toggle down to Wipe Dalvik-cache and select by pressing the POWER button.
Once that has complete, select Return.
FLASH ZIP
Use the VOL DOWN toggle to move to Flash zip from sd card.
Find the ZIP file Custom ROM you want to flash by using the VOL DOWN toggle. Select it using the POWER button.
Your ROM will now be installed onto your device.
BACK TO RECOVERY
After the installation has completed, you will be brought back main menu, use the POWER button to select the first option “reboot system now”. And your device will reboot itself like normal.
Enjoy your new ROM!

, and there was toast root, People were saying about using underclock widget you needed toast root, and there were certain things that would be permanently lost that you couldnt do with your EVO if you applied the very first FOTA update and lost ability for Toast root, I assume this is false information now today ?